C++ Stil Vorgabe basierend auf Google C++ Style Guide
Hintergrund
C++ is one of the main development languages used by many of Google's open-source projects. As every C++ programmer knows, the language has many powerful features, but this power brings with it complexity, which in turn can make code more bug-prone and harder to read and maintain.
C++ ist eine der Hauptentwicklungssprachen, die von vielen quelloffenen Google Projekten benutzt wird. Wie jeder C++- Programmierer weiss, hat diese Computersprache mächtige Eigenschaften, aber bringt auch eine grosse Komplexität mit sich, die den Code fehleranfällig macht, schwierig zu lesen und weiter zu pflegen.
The goal of this guide is to manage this complexity by describing in detail the dos and don'ts of writing C++ code. These rules exist to keep the code base manageable while still allowing coders to use C++ language features productively.
Das Ziel dieser Anleitung ist, diese Komplexität zu meistern, indem detailliert auf Aspekte der C++-Programmierung eingegangen wird, wie man es machen oder lassen sollte. Diese Regeln bestehen, um die Codebasis handhabbar zu belassen, und doch dem Programmierer zu erlauben, die Eigenschaften von C++ produktiv einzusetzen.
Style, also known as readability, is what we call the conventions that govern our C++ code. The term Style is a bit of a misnomer, since these conventions cover far more than just source file formatting.
Diese Konvention, auch als Stil oder Lesbarkeit bezeichnet, überwacht unseren C++ Code. Der Ausdruck Stil ist etwas zu schwach ausgefallen, denn diese Konvention geht weit mehr als nur bis zur Sourcecode-Formatierung.
Most open-source projects developed by Google conform to the requirements in this guide.
Die meisten quelloffenen Projekte, welche durch Google entwickelt werden, halten sich an die Vorgaben dieser Anleitung.
Note that this guide is not a C++ tutorial: we assume that the reader is familiar with the language.
Beachte, dass diese Anleitung keine Unterweisung in der Programmierung mit C++ ist. Wir gehen davon aus, dass der Leser, die Leserin mit dieser Computersprache bekannt ist.
Ziele dieser Stilanleitung
Why do we have this document?
Weshalb haben wir dieses Dokument?
There are a few core goals that we believe this guide should serve. These are the fundamental whys that underlie all of the individual rules. By bringing these ideas to the fore, we hope to ground discussions and make it clearer to our broader community why the rules are in place and why particular decisions have been made. If you understand what goals each rule is serving, it should be clearer to everyone when a rule may be waived (some can be), and what sort of argument or alternative would be necessary to change a rule in the guide.
Wir denken, dass diese Anleitung einige zentrale Anliegen aufzeigen sollte. Das sind die fundamentalen Warum, die allen Regeln zugrunde liegen. Um Diskussionen eine gute Basis zu geben und um der weiteren Kommune/Umgebung aufzuzeigen, warum bestimmte Regeln in Kraft sind und warum wir einzelne Entscheidungen gefällt haben, begründen wir im Folgenden unsere Ideen. Wenn man versteht, welche Ziele eine jede Regel verfolgt, dann sollte es auch für alle klarer sein, wann eine Regel übergangen werden kann, und welche Argumente oder Alternativen für eine Änderung der Regeln in dieser Anleitung sprechen.
The goals of the style guide as we currently see them are as follows:
Die Ziele dieser Stilanleitung, wie wir sie im Moment sehen, sind wie folgt:
- Style rules should pull their weight
- Stileregeln sollten schon Gewicht haben
- The benefit of a style rule
must be large enough to justify asking all of our engineers to
remember it. The benefit is measured relative to the codebase we would
get without the rule, so a rule against a very harmful practice may
still have a small benefit if people are unlikely to do it
anyway. This principle mostly explains the rules we don’t have, rather
than the rules we do: for example,
goto
contravenes many of the following principles, but is already vanishingly rare, so the Style Guide doesn’t discuss it. - Der Vorteil einer Stilregel sollte gross genug sein, um zu rechtfertigen,
dass alle Google Ingenieure sie beachten. Der Vorteil wird relativ gemessen gegenüber
einer Codebasis, die wir erhalten würden, wenn die Regel nicht in Kraft wäre.
Eine Regel gegen eine üble Angewohnheit, hätte nur einen kleinen Effekt, wenn
diese Vergehen von den Leuten eh selten begangen würden. Dieses Prinzip erklärt,
warum wir viele Regeln ausser Acht lassen: z.B.
goto
verstösst schon gegen eine Anzahl von Prinzipien in dieser Anleitung, ist aber ausserordentlich rar geworden, weshalb es hier auch nicht weiter diskutiert wird. - Optimize for the reader, not the writer
- Optimiere für den Leser, nicht den Author
- Our codebase (and most individual components submitted to it) is
expected to continue for quite some time. As a result, more time will
be spent reading most of our code than writing it. We explicitly
choose to optimize for the experience of our average software engineer
reading, maintaining, and debugging code in our codebase rather than
ease when writing said code. "Leave a trace for the reader" is a
particularly common sub-point of this principle: When something
surprising or unusual is happening in a snippet of code (for example,
transfer of pointer ownership), leaving textual hints for the reader
at the point of use is valuable (
std::unique_ptr
demonstrates the ownership transfer unambiguously at the call site). - Von der Codebasis, und den meisten einzelnen hinzugefügten Komponenten darin,
wird erwartet, dass sie noch lange Zeit währt. Daraus folgt, dass mehr Zeit mit
dem Lesen des Codes verbracht wird, als mit dem Schreiben. Explizit nehmen
wir Bezug auf einen Durchschnittsprogrammierer bei Google, der Code liest, unterhält und
testet in der Codebasis, anstelle das Schreiben solchen Codes zu vereinfachen.
"Hinterlasse dem Leser eine Spur" könnte dieses Prinzip untermalen: wenn etwas
überraschendes oder unübliches in einem Codeschnipsel passiert (z.B. das
Ändern des Besitzers eines Pointers), dann ist es wertvoll, wenn dem Leser an
dieser Stelle ein helfender Kommentar hinterlassen wird. (
std::unique_ptr
zeigt schon den Übertrag des Besitzes unmissverständlich auf.) - Be consistent with existing code
- Beachte die Übereinstimmung mit existierendem Code
- Using one style consistently through our codebase lets us focus on
other (more important) issues. Consistency also allows for
automation: tools that format your code or adjust
your
#include
s only work properly when your code is consistent with the expectations of the tooling. In many cases, rules that are attributed to "Be Consistent" boil down to "Just pick one and stop worrying about it"; the potential value of allowing flexibility on these points is outweighed by the cost of having people argue over them. - Einen Programmierstil konsistent auf die Codebasis anzuwenden gibt
einem die Möglichkeit, sich auf eventuell wichtigere Angelegenheiten zu
konzentrieren. Durch Konsistenz kann auch Automatisierung erreicht werden:
nur wer sich an die Vorgaben der Tools hält, kann diese auch einsetzen (z.B. das
automatische Formatieren des Codes oder die Anpassung der
#include
Anweisungen). Einige Fälle, in denen Regeln als "Sei konsistent" bezeichnet sind, reduzieren sich auf "Nimm einfach eine und lass es gut sein". Die möglichen Diskussion darüber welche zu wählen ist, überwiegt den Nutzen bei weitem. - Be consistent with the broader C++ community when appropriate
- Beachte die weitere C++ Kommune, wenn zuträglich
- Consistency with the way other organizations use C++ has value for the same reasons as consistency within our code base. If a feature in the C++ standard solves a problem, or if some idiom is widely known and accepted, that's an argument for using it. However, sometimes standard features and idioms are flawed, or were just designed without our codebase's needs in mind. In those cases (as described below) it's appropriate to constrain or ban standard features. In some cases we prefer a homegrown or third-party library over a library defined in the C++ Standard, either out of perceived superiority or insufficient value to transition the codebase to the standard interface.
- Die gleichen Überlegungen liegen dem Beachten der Benutzung von C++ in anderen Organisationen als auch in der eigenen Codebasis zugrunde. Gibt es im C++ Standard eine Eigenschaft, die ein Problem löst, oder wird ein akzeptiertes Idiom weitherum eingesetzt, dann ist das schon ein Argument um es zu benutzen. Nur manchmal sind eben solche Standards oder Idiome nicht zu gebrauchen oder wurden nicht im Hinblick auf eine bestimmte Codebasis geschaffen. In solchen Fällen (wie weiter unten beschrieben) ist es angezeigt, von Standardeigenschaften Abstand zu nehmen oder sie sogar zu meiden. In einzelnen Fällen bevorzugt Google eine hausgemachte Lösung oder Bibliotheken von Drittparteien gegenüber dem Standard, aus gefühlter Überlegenheit oder mangels Nutzen aus der Portierung der Codebasis auf den Standard.
- Avoid surprising or dangerous constructs
- Vermeide überraschende und gefährliche Konstrukte
- C++ has features that are more surprising or dangerous than one might think at a glance. Some style guide restrictions are in place to prevent falling into these pitfalls. There is a high bar for style guide waivers on such restrictions, because waiving such rules often directly risks compromising program correctness.
- C++ hat überraschendere oder gefährlichere Merkmale, als man zuerst denkt. Einige Einschränkungen in dieser Stilanleitung sind nur dazu da, um nicht in diese Löcher zu tapsen. Bei solchen Regeln ist für das Auslassen ihrer Beachtung eine höherer Massstab angesetzt, weil daraus meist Fehler in den Programmen folgen.
- Avoid constructs that our average C++ programmer would find tricky or hard to maintain
- Vermeide Konstrukte, die ein durchschnittlicher C++-Programmierer schwierig findet oder schwer zu unterhalten
- C++ has features that may not be generally appropriate because of the complexity they introduce to the code. In widely used code, it may be more acceptable to use trickier language constructs, because any benefits of more complex implementation are multiplied widely by usage, and the cost in understanding the complexity does not need to be paid again when working with new portions of the codebase. When in doubt, waivers to rules of this type can be sought by asking your project leads. This is specifically important for our codebase because code ownership and team membership changes over time: even if everyone that works with some piece of code currently understands it, such understanding is not guaranteed to hold a few years from now.
- C++ kennt Eigenheiten, deren Gebrauch nicht den Zuwachs an Komplexität rechtfertigen, um sie weiträumig einzusetzen. In viel benutztem Code können sie eingesetzt werden, da eine umständlichere Umschreibung multipliziert mit der Nutzung zu aufwändig wären. Bei Zweifeln kann um eine Befreiung von der Beachtung solcher Regeln angefragt werden. Dies ist sicherlich angebracht, da Code-Verantwortung und Teammitgliedschaft mit der Zeit ändern. Auch wenn jeder, der heute mit dem Code arbeitet, ihn auch versteht, ist das kein Garant dafür, dass es in mehreren Jahren auch so sein wird.
- Be mindful of our scale
- Achte auf die Ausmasse
- With a codebase of 100+ million lines and thousands of engineers, some mistakes and simplifications for one engineer can become costly for many. For instance it's particularly important to avoid polluting the global namespace: name collisions across a codebase of hundreds of millions of lines are difficult to work with and hard to avoid if everyone puts things into the global namespace.
- In einer Codebasis, die mehr als 100 Millionen Zeilen Code zählt und tausende Ingenieure daran arbeiten, kann eine Fehler oder Vereinfachung eines einzelnen sehr kostspielig werden für alle. Zum Beispiel ist es speziell wichtig, den Namensraum nicht zu verunreinigen: Namenskollisionen über die Codebasis hinweg sind schwer zu verhindern wenn jeder einfach Sachen in den globalen Namensraum stellt.
- Concede to optimization when necessary
- Mache Optimierungen wenn nötig
- Performance optimizations can sometimes be necessary and appropriate, even when they conflict with the other principles of this document.
- Manchmal kann es notwendig sein eine Geschwindigkeitsoptimierung vorzunehmen, auch wenn diese im Konflikt mit anderen Prinzipien dieses Dokuments stehen.
The intent of this document is to provide maximal guidance with reasonable restriction. As always, common sense and good taste should prevail. By this we specifically refer to the established conventions of the entire Google C++ community, not just your personal preferences or those of your team. Be skeptical about and reluctant to use clever or unusual constructs: the absence of a prohibition is not the same as a license to proceed. Use your judgment, and if you are unsure, please don't hesitate to ask your project leads to get additional input.
Die Absicht hinter diesem Dokument ist die Unterstützung mit Leitlinien unter angemessenen Einschränkungen. Gesunder Menschenverstand und ein gutes Gespür sollten Vorrang haben. Dafür verweisen wir ausdrücklich auf die etablierten Konventionen in der Google C++ Kommune, nicht nur jedermanns persönliche oder die im Team. Sei weiterhin vorsichtig und zurückhaltend in der Benutzung von schlauen aber unüblichen Konstrukten. Das Nichtvorhandensein eines Verbots ist nicht gleichzusetzen mit einer Erlaubnis weiter zu gehen. Wäge selber ab, oder frag einen Erhöhten um zusätzliche Information.
Header Dateien
In general, every .cc
file should have an
associated .h
file. There are some common
exceptions, such as unittests and
small .cc
files containing just a
main()
function.
Zu jeder .cc
Datei gehört eine
.h
Datei. Es gibt ein paar wenige Ausnahmen,
wie Unittest und kleine .cc
Dateien, die gerade mal
eine main()
Funktion enthalten.
Correct use of header files can make a huge difference to the readability, size and performance of your code.
Der korrekte Einsatz von Header Dateien kann einen grossen Einfluss auf die Lesbarkeit, die Grösse und die Leistung deines Codes haben.
The following rules will guide you through the various pitfalls of using header files.
Die folgenden Regeln leiten dich um die Schlaglöcher der Benutzung von Header Dateien.
In sich abgeschlossene Header
Header files should be self-contained (compile on their own) and
end in .h
. Non-header files that are meant for inclusion
should end in .inc
and be used sparingly.
Header Dateien sollten in sich abgeschlossen sein (kompilierbar sein) und
mit der Endung .h
im Namen versehen sein. Nicht-Header Dateien, die nur
für die Inklusion in anderen gedacht sind, sollten mit der Endung .inc
versehen sein und nur selten eingesetzt werden.
All header files should be self-contained. Users and refactoring tools should not have to adhere to special conditions to include the header. Specifically, a header should have header guards and include all other headers it needs.
Alle Header Dateien sollten selbst-genügsam sein. Benutzer und Refaktorisierungswerkzeuge sollten sich nicht verbiegen um ihn einzubinden. Speziell sollte der Header einen
Prefer placing the definitions for template and inline functions in
the same file as their declarations. The definitions of these
constructs must be included into every .cc
file that uses
them, or the program may fail to link in some build configurations. If
declarations and definitions are in different files, including the
former should transitively include the latter. Do not move these
definitions to separately included header files (-inl.h
);
this practice was common in the past, but is no longer allowed.
Die Definition von template und inline Funktionen geschieht
am Besten in der gleichen Datei wie ihre Deklaration. Deren Definition
muss in jeder .cc
Datei erfolgen, die sie benutzt, sonst
kann es vorkommen, dass das Linken missratet. Sind Deklaration und
Definition in verschiedenen Dateien, dann sollte das Einbinden des
ersteren das zweite miteinbinden. Es ist nicht mehr erlaubt, wie in
der Vergangenheit üblich, diese Definitionen in eigene Header Dateien mit
Endung -inl.h
auszulagern.
As an exception, a template that is explicitly instantiated for
all relevant sets of template arguments, or that is a private
implementation detail of a class, is allowed to be defined in the one
and only .cc
file that instantiates the template.
Als Ausnahme kann ein Template, welches explizit instantiiert
wird für alle Template-Argumente, oder welches ein privates Implementationsdetail
einer Klasse ist, in der .cc
Datei stehen, in welcher es auch
verwendet wird.
There are rare cases where a file designed to be included is not
self-contained. These are typically intended to be included at unusual
locations, such as the middle of another file. They might not
use header guards, and might not include
their prerequisites. Name such files with the .inc
extension. Use sparingly, and prefer self-contained headers when
possible.
Es gibt seltene Fälle, in welchen eine Header-Datei nicht
in sich abgeschlossen ist. Diese werden typischerweise inmitten einer
anderen Datei inkludiert. Solche Dateien sollten die Endung .inc
besitzen und keinen Header-Schutz benutzen.
Verwende diese nur äusserst selten und bevorzuge in sich abgeschlossene
Header-Dateien.
Der #define Schutz
All header files should have #define
guards to
prevent multiple inclusion. The format of the symbol name
should be
<PROJECT>_<PATH>_<FILE>_H_
.
Alle Header-Dateien sollten einen #define
Schutz haben,
um bei mehrfacher Einbindung keine Neudeklarationen nach sich zu ziehen.
Das definierte Symbol sollte folgendem Schema folgen:
<PROJEKT>_<PFAD>_<DATEINAME>_H_
.
To guarantee uniqueness, they should
be based on the full path in a project's source tree. For
example, the file foo/src/bar/baz.h
in
project foo
should have the following
guard:
Um Einmaligkeit zu garantieren, sollte dieses Symbol
den ganzen Pfad vom Ursprung des Projekts beinhalten. Als Beispiel
sollte die Datei foo/src/bar/baz.h
im Projekt foo
den folgenden Header-Schutz definiert bekommen:
#ifndef FOO_BAR_BAZ_H_ #define FOO_BAR_BAZ_H_ ... #endif // FOO_BAR_BAZ_H_
Vorwärtsdeklarationen
Avoid using forward declarations where possible.
Just #include
the headers you need.
Vermeide möglichst Vorwärtsdeklarationen.
Einfach #include
die Header-Dateien, die du brauchst.
A "forward declaration" is a declaration of a class, function, or template without an associated definition.
Eine Vorwärtsdeklaration ist eine Deklaration einer Klasse, Funktion oder einem Template ohne dazugehörende Definition.
- Forward declarations can save compile time, as
#include
s force the compiler to open more files and process more input. - Vorwärtsdeklaration können Kompilierzeit einsparen,
weil
#include
den Compiler zwingen eine Datei zu öffnen und sie zu prozessieren. - Forward declarations can save on unnecessary
recompilation.
#include
s can force your code to be recompiled more often, due to unrelated changes in the header. - Vorwärtsdeklaration können auch unnötige Neuübersetzungen
unterdrücken, verursacht durch nebensächliche Änderungen in den
#include
Header.
- Forward declarations can hide a dependency, allowing user code to skip necessary recompilation when headers change.
- Vorwärtsdeklaration können Abhängigkeiten verstecken und überspringen die Neuübersetzung von Benutzercode wenn Header geändert worden sind.
- A forward declaration may be broken by subsequent changes to the library. Forward declarations of functions and templates can prevent the header owners from making otherwise-compatible changes to their APIs, such as widening a parameter type, adding a template parameter with a default value, or migrating to a new namespace.
- Eine Vorwärtsdeklaration kann ungültig werden nach Änderungen in einer Bibliothek. Vorwärtsdeklarationen von Funktionen und Templaten können verhindern, dass Header-Eigner sonst gültige Änderungen an ihrem API vornehmen können. Wie da sind: Typausweitung, Hinzufügen eines Template-Parameters mit einem Defaultwert oder das Migrieren in einen anderen Namensraum.
- Forward declaring symbols from namespace
std::
yields undefined behavior. - Die Vorwärtsdeklaration eines Symbols im Namensraum
std::
zieht undefiniertes Verhalten nach sich. - It can be difficult to determine whether a forward
declaration or a full
#include
is needed. Replacing an#include
with a forward declaration can silently change the meaning of code:// b.h: struct B {}; struct D : B {}; // good_user.cc: #include "b.h" void f(B*); void f(void*); void test(D* x) { f(x); } // calls f(B*)
If the#include
was replaced with forward decls forB
andD
,test()
would callf(void*)
. - Es kann schwer sein abzuklären, ob eine
Vorwärtsdeklaration oder ein vollständiges
#include
notwendig sind. Das Ersetzen von#include
mit einer Vorwärtsdeklaration kann still und heimlich den Sinn von Code ändern:// b.h: struct B {}; struct D : B {}; // good_user.cc: #include "b.h" void f(B*); void f(void*); void test(D* x) { f(x); } // calls f(B*)
Sofern das#include
durch eine Vorwärtsdeklaration fürB
undD
ersetzt wurde, tätetest()
die Funktionf(void*)
aufrufen. - Forward declaring multiple symbols from a header
can be more verbose than simply
#include
ing the header. - Mehrere Symbole aus einer Headerdatei vowärts zu deklarieren
kann aufwändiger sein als bloss ein
#include
. - Structuring code to enable forward declarations (e.g. using pointer members instead of object members) can make the code slower and more complex.
- Den Code hinsichtlich Vorwärtsdeklarationen umzubauen (z.B. Zeigermethoden anstelle Objektmethoden), kann ihn langsamer und komplexer machen.
- Try to avoid forward declarations of entities defined in another project.
- Versuche Vorwärtsdeklarationen von Sachen, die in anderen Projekten definiert sind, zu vermeiden.
- When using a function declared in a header file,
always
#include
that header. - Sobald eine Funktion benutzt wird, die in einer Headerdatei
deklariert wurde, dann
#include
diese Datei. - When using a class template, prefer to
#include
its header file. - Bei Benutzung eines Klassentemplat, bevorzuge ihre
Headerdatei zu
#include
.
Please see Names and Order of Includes for rules about when to #include a header.
Bite sehe auch in Namen und Reihenfolge von Include nach für Regeln über das Inkludieren von Headerdateien.
Inline Funktionen
Define functions inline only when they are small, say, 10 lines or fewer.
Definiere Funktionen als inline
nur,
wenn sie klein sind, also etwa 10 Zeilen oder weniger zählen.
You can declare functions in a way that allows the compiler to expand them inline rather than calling them through the usual function call mechanism.
Du kannst Funktionen auf eine Art deklarieren, damit der Compiler sie inline kopieren kann, anstelle sie über den normalen Funktionsaufrufmechanismus aufzurufen.
Inlining a function can generate more efficient object code, as long as the inlined function is small. Feel free to inline accessors and mutators, and other short, performance-critical functions.
Eine Funktion inline
zu deklarieren kann
effizienteren Code generieren, sofern diese Funktion klein ist.
Auslesemethoden, Mutationsmethoden, und andere Geschwindigkeitskritische,
kleine Funktionen, können ruhig inline
deklariert werden.
Overuse of inlining can actually make programs slower. Depending on a function's size, inlining it can cause the code size to increase or decrease. Inlining a very small accessor function will usually decrease code size while inlining a very large function can dramatically increase code size. On modern processors smaller code usually runs faster due to better use of the instruction cache.
Die Übernutzung von inline
kann
Programme sogar langsamer machen. Abhängig von der Grösse
einer Funktion, kann dies die Programmgrösse vergrössern
oder verkleinern. Eine sehr kleine Auslesemethode zu
inline
wird normalerweise den Code verkleinern.
Aber eine sehr grosse Funktion zu inline
wird
die Programmgrösse dramatisch vergrössern. Auf modernen
Prozessoren läuft kleinerer Code häufig schneller aufgrund
der besseren Nutzung des Befehlscache.
A decent rule of thumb is to not inline a function if it is more than 10 lines long. Beware of destructors, which are often longer than they appear because of implicit member- and base-destructor calls!
Eine gängige Daumenregel besagt, keine Funktion zu
inline
n wenn sie mehr als 10 Zeilen lang ist.
Nimm dich in Acht vor den Abräumern, da diese oft länger sind
als man denkt, aufgrund der impliziten Aufrufe von zugehörigen
Methoden und Basisklassenabräumern!
Another useful rule of thumb: it's typically not cost effective to inline functions with loops or switch statements (unless, in the common case, the loop or switch statement is never executed).
Eine weitere nützliche Daumenregel:
es ist nicht kosteneffizient eine Funktion zu inline
n,
wenn diese Schleifen oder Verzweigungen enthält (ausser,
diese Befehle werden im allgemeinen Fall gar nie ausgeführt).
It is important to know that functions are not always inlined even if they are declared as such; for example, virtual and recursive functions are not normally inlined. Usually recursive functions should not be inline. The main reason for making a virtual function inline is to place its definition in the class, either for convenience or to document its behavior, e.g., for accessors and mutators.
Es ist wichtig zu wissen, dass Funktionen
nicht immer geinline
werden, auch wenn sie
als solche deklariert wurden. Darunter fallen z.B.
virtuelle und rekursive Funktionen. Normalerweise sollten
rekursive Funktionen nicht als inline
deklariert werden. Der Hauptgrund warum eine virtuelle
Funktione inline
deklariert wird, ist ihre
Definition in der abgeleiteten Klasse zu platzieren,
einerseits wegen Bequemlichkeit, aber auch um ihre
Verhaltensweise zu dokumentieren, z.B. Auslese-
oder Mutationsmethoden.
Namen und Reihenfolge der Includes
Use standard order for readability and to avoid hidden
dependencies: Related header, C library, C++ library, other libraries'
.h
, your project's .h
.
Benutze die allgemeine Reihenfolge für verbesserte Lesbarkeit und
um versteckte Abhängigkeiten zu verhindern: Verwandte Headerdateien, C Bibliotheken,
C++ Bibliotheken, .h
anderer Bibliotheken, dann dem Projekt seine
.h
.
All of a project's header files should be
listed as descendants of the project's source
directory without use of UNIX directory shortcuts
.
(the current directory) or ..
(the parent directory). For example,
google-awesome-project/src/base/logging.h
should be included as:
Alle Headerdateien des Projekts sollten startend mit dem
Quelldateien Verzeichnis aufgeführt werden, ohne die UNIX
Verzeichnisse .
(das aktuelle Verzeichnis) oder
..
(das übergeordnete Verzeichnis) einzuschliessen.
Beispiel:
google-awesome-project/src/base/logging.h
sollte eingebunden werden als:
#include "base/logging.h"
In dir/foo.cc
or
dir/foo_test.cc
, whose main
purpose is to implement or test the stuff in
dir2/foo2.h
, order your includes
as follows:
In dir/foo.cc
oder
dir/foo_test.cc
, wessen Hauptverwendung
die Implementation und der Test von Definitionen in
dir2/foo2.h
ist, ordne die Includes
folgendermassen:
dir2/foo2.h
.dir2/foo2.h
.- C system files.
- C Systemdateien.
- C++ system files.
- C++ Systemdateien.
- Other libraries'
.h
files. - Anderer Bibliotheken
.h
Dateien. - Your project's
.h
files. .h
Dateien deines Projekts.
With the preferred ordering, if
dir2/foo2.h
omits any necessary
includes, the build of dir/foo.cc
or dir/foo_test.cc
will break.
Thus, this rule ensures that build breaks show up first
for the people working on these files, not for innocent
people in other packages.
Mit dieser kanonischen Reihenfolge, wenn
dir2/foo2.h
einen Include
auslässt, wird das Erstellen von dir/foo.cc
oder dir/foo_test.cc
nicht funktionieren.
Deshalb führt diese Regel dazu, dass das Kompilieren abbricht
bei denen, die an diesen Dateien arbeiten, und nicht bei den
Unschuldigen, die in anderen Paketen stecken.
dir/foo.cc
and
dir2/foo2.h
are usually in the same
directory (e.g. base/basictypes_test.cc
and
base/basictypes.h
), but may sometimes be in different
directories too.
dir/foo.cc
und
dir2/foo2.h
sind oft im selben
Verzeichnis anzutreffen (z.B. base/basictypes_test.cc
and
base/basictypes.h
), können aber auch in ganz unterschiedlichen
zu liegen kommen.
Within each section the includes should be ordered alphabetically. Note that older code might not conform to this rule and should be fixed when convenient.
In jedem Abschnitt sollten die Includes alphabethisch sortiert sein. Beachte, dass älterer Code dieser Regel nicht immer folgt und deshalb praktischerweise angepasst werden sollte.
You should include all the headers that define the symbols you rely
upon, except in the unusual case of forward
declaration. If you rely on symbols from bar.h
,
don't count on the fact that you included foo.h
which
(currently) includes bar.h
: include bar.h
yourself, unless foo.h
explicitly demonstrates its intent
to provide you the symbols of bar.h
. However, any
includes present in the related header do not need to be included
again in the related cc
(i.e., foo.cc
can
rely on foo.h
's includes).
Du solltest alle Header inkludieren, welche die Symbole definieren,
von denen du abhängst, ausgenommen den unüblichen Fall von
Vorwärtsdeklaration. Benötigst du ein
Symbol aus bar.h
, zähle nicht darauf, dass du foo.h
einbindest, und dieses bar.h
inkludiert, sondern inkludiere bar.h
direkt. Eine Ausnahme wäre, wenn foo.h
ausdrücklich dafür gedacht ist,
die Symbole von bar.h
auch zur Vefügung zu stellen. Andererseits müssen
keine Header noch einmal in den cc
Dateien eingebunden werden, wenn
die Header dies schon erledigen.
For example, the includes in
google-awesome-project/src/foo/internal/fooserver.cc
might look like this:
Zum Beispiel sieht die Einbindung der Header in der Datei
google-awesome-project/src/foo/internal/fooserver.cc
so aus:
#include "foo/server/fooserver.h" #include <sys/types.h> #include <unistd.h> #include <hash_map> #include <vector> #include "base/basictypes.h" #include "base/commandlineflags.h" #include "foo/server/bar.h"
Sometimes, system-specific code needs conditional includes. Such code can put conditional includes after other includes. Of course, keep your system-specific code small and localized. Example:
Manchmal benötigt systemnaher Code eine konditionale Einbindung. Eine solche sollte nach den anderen Einbindungen stehen und natürlich klein ausfallen wie in folgendem Beispiel:
#include "foo/public/fooserver.h" #include "base/port.h" // For LANG_CXX11. #ifdef LANG_CXX11 #include <initializer_list> #endif // LANG_CXX11
Gültigkeitsbereich
Namensbereich
With few exceptions, place code in a namespace. Namespaces
should have unique names based on the project name, and possibly
its path. Do not use using-directives (e.g.
using namespace foo
). Do not use
inline namespaces. For unnamed namespaces, see
Unnamed Namespaces and
Static Variables.
Abgesehen von wenigen Ausnahmen, setzt man seinen Code in einen
Namensbereich. Dieser sollte einen eindeutigen Namen im Projekt aufweisen und
möglicherweise aus einem Dateipfad bestehen. Es sollte keine using-Direktive
verwendet werden (z.B. using namespace foo
) und auch
keine inline-Namensbereiche. Für unbenannte Namensbereiche siehe unbenannte Namensbereiche und
statische Variablen.
Namespaces subdivide the global scope into distinct, named scopes, and so are useful for preventing name collisions in the global scope.
Namensbereiche unterteilen den globalen Namensbereich in einzelne Gültigkeitsbereiche und helfen so Namenskonflikte zu verhindern.
Namespaces provide a method for preventing name conflicts in large programs while allowing most code to use reasonably short names.
Namensbereiche sind die Methode der Wahl, um in grossen Programmen Namenskonflikte zu verhindern und ermöglichen dennoch die Verwendung von relativ kurzen Namen.
For example, if two different projects have a class
Foo
in the global scope, these symbols may
collide at compile time or at runtime. If each project
places their code in a namespace, project1::Foo
and project2::Foo
are now distinct symbols that
do not collide, and code within each project's namespace
can continue to refer to Foo
without the prefix.
Eine Klasse Foo
, definiert im globalen Namensraum
zweier verschiedener Projekte, kann zu Kompilierzeit oder auch zu
Laufzeit einen Namenskonflikt verursachen. Wenn jedes Projekt seinen
Code in einen eigenen Namensbereich setzen würde (z.B.
project1::Foo
and project2::Foo
), dann
wären dies zwei unterschiedliche Symbole, die nicht kollidieren können.
Und Code in den jeweiligen Projekten kann weiterhin auf Foo
referenzieren; ohne das Prefix.
Inline namespaces automatically place their names in the enclosing scope. Consider the following snippet, for example:
Inline-Namensbereiche setzen ihre Symbole in den umgebenden Namensbereich. Betrachte den folgenden Codeausschnitt als Beispiel:
namespace X { inline namespace Y { void foo(); } // namespace Y } // namespace X
The expressions X::Y::foo()
and
X::foo()
are interchangeable. Inline
namespaces are primarily intended for ABI compatibility
across versions.
Der Ausdruck X::Y::foo()
und
X::foo()
sind austauschbar. Inline-Namensbereiche
werden vorwiegend für ABI-Kompatibilität über verschiedene
Versionen verwendet.
Namespaces can be confusing, because they complicate the mechanics of figuring out what definition a name refers to.
Namensbereiche können verstörend wirken, weil sie das Auffinden der Definition anhand eines Namens komplizieren.
Inline namespaces, in particular, can be confusing because names aren't actually restricted to the namespace where they are declared. They are only useful as part of some larger versioning policy.
Inline-Namensbereiche sind nicht auf den Ort ihrer Deklaration beschränkt. Diese sind nur nötig als Teil einer grösseren Versionspolitik.
In some contexts, it's necessary to repeatedly refer to symbols by their fully-qualified names. For deeply-nested namespaces, this can add a lot of clutter.
In einzelnen Umgebungen ist es nötig, dass Symbole nur voll qualifiziert verwendet werden. Bei tief verschachtelten Namensbereichen kann dies einigen Balast nach sich ziehen.
Namespaces should be used as follows:
Namensbereiche sollten folgendermassen verwendet werden:
- Follow the rules on Namespace Names.
- Folge den Regeln von Namen in Namensbereichen.
- Terminate namespaces with comments as shown in the given examples.
- Beende einen Namensbereich mit einem Kommentar, wie im folgenden Beispiel aufgezeigt.
-
Namespaces wrap the entire source file after includes, gflags definitions/declarations and forward declarations of classes from other namespaces.
Namensbereiche umschliessen die ganze Quelldatei nach den Includes, gflags Definitionen/Deklarationen und Vorwärtsdeklarationen von Klassen aus anderen Namensbereichen.
// In the .h file namespace mynamespace { // All declarations are within the namespace scope. // Notice the lack of indentation. class MyClass { public: ... void Foo(); }; } // namespace mynamespace
// In the .cc file namespace mynamespace { // Definition of functions is within scope of the namespace. void MyClass::Foo() { ... } } // namespace mynamespace
More complex
.cc
files might have additional details, like flags or using-declarations.#include "a.h" DEFINE_FLAG(bool, someflag, false, "dummy flag"); namespace a { using ::foo::bar; ...code for a... // Code goes against the left margin. } // namespace a
- Do not declare anything in namespace
std
, including forward declarations of standard library classes. Declaring entities in namespacestd
is undefined behavior, i.e., not portable. To declare entities from the standard library, include the appropriate header file. You may not use a using-directive to make all names from a namespace available.
// Forbidden -- This pollutes the namespace. using namespace foo;
Do not use Namespace aliases at namespace scope in header files except in explicitly marked internal-only namespaces, because anything imported into a namespace in a header file becomes part of the public API exported by that file.
// Shorten access to some commonly used names in .cc files. namespace baz = ::foo::bar::baz;
// Shorten access to some commonly used names (in a .h file). namespace librarian { namespace impl { // Internal, not part of the API. namespace sidetable = ::pipeline_diagnostics::sidetable; } // namespace impl inline void my_inline_function() { // namespace alias local to a function (or method). namespace baz = ::foo::bar::baz; ... } } // namespace librarian
- Do not use inline namespaces.
Unbenannte Namensräume und statische Variablen
When definitions in a .cc
file do not need to be
referenced outside that file, place them in an unnamed
namespace or declare them static
. Do not use either
of these constructs in .h
files.
Wenn Definitionen in einer .cc
Datei nicht von
ausserhalb dieser Datei referenziert werden, platziere diese in einem
anonymen Namensraum oder deklariere sie static
. Benutze keinen
von beidem in .h
Dateien.
All declarations can be given internal linkage by placing them in
unnamed namespaces, and functions and variables can be given internal linkage by
declaring them static
. This means that anything you're declaring
can't be accessed from another file. If a different file declares something
with the same name, then the two entities are completely independent.
Use of internal linkage in .cc
files is encouraged
for all code that does not need to be referenced elsewhere.
Do not use internal linkage in .h
files.
Format unnamed namespaces like named namespaces. In the terminating comment, leave the namespace name empty:
namespace { ... } // namespace
Nicht-Member, statische Member, and globale Funktionen
Prefer placing nonmember functions in a namespace; use completely global functions rarely. Prefer grouping functions with a namespace instead of using a class as if it were a namespace. Static methods of a class should generally be closely related to instances of the class or the class's static data.
Prefer placing nonmember functions in a namespace; use completely global functions rarely. Prefer grouping functions with a namespace instead of using a class as if it were a namespace. Static methods of a class should generally be closely related to instances of the class or the class's static data.
Nonmember and static member functions can be useful in some situations. Putting nonmember functions in a namespace avoids polluting the global namespace.
Nonmember and static member functions may make more sense as members of a new class, especially if they access external resources or have significant dependencies.
Sometimes it is useful to define a
function not bound to a class instance. Such a function
can be either a static member or a nonmember function.
Nonmember functions should not depend on external
variables, and should nearly always exist in a namespace.
Rather than creating classes only to group static member
functions which do not share static data, use
namespaces instead. For a header
myproject/foo_bar.h
, for example, write
namespace myproject { namespace foo_bar { void Function1(); void Function2(); } // namespace foo_bar } // namespace myproject
instead of
namespace myproject { class FooBar { public: static void Function1(); static void Function2(); }; } // namespace myproject
If you define a nonmember function and it is only
needed in its .cc
file, use
internal linkage to limit
its scope.
Lokale Variablen
Place a function's variables in the narrowest scope possible, and initialize variables in the declaration.
Platziere eine Funktionsvariable im eingeschränktesten Gültigkeitsbereich möglich und initialisiere die Variablen in der Deklaration.
C++ allows you to declare variables anywhere in a function. We encourage you to declare them in as local a scope as possible, and as close to the first use as possible. This makes it easier for the reader to find the declaration and see what type the variable is and what it was initialized to. In particular, initialization should be used instead of declaration and assignment, e.g.:
int i; i = f(); // Bad -- initialization separate from declaration.
int j = g(); // Good -- declaration has initialization.
std::vector<int> v; v.push_back(1); // Prefer initializing using brace initialization. v.push_back(2);
std::vector<int> v = {1, 2}; // Good -- v starts initialized.
Variables needed for if
, while
and for
statements should normally be declared
within those statements, so that such variables are confined
to those scopes. E.g.:
while (const char* p = strchr(str, '/')) str = p + 1;
There is one caveat: if the variable is an object, its constructor is invoked every time it enters scope and is created, and its destructor is invoked every time it goes out of scope.
// Inefficient implementation: for (int i = 0; i < 1000000; ++i) { Foo f; // My ctor and dtor get called 1000000 times each. f.DoSomething(i); }
It may be more efficient to declare such a variable used in a loop outside that loop:
Foo f; // My ctor and dtor get called once each. for (int i = 0; i < 1000000; ++i) { f.DoSomething(i); }
Statische und globale Variablen
Variables of class type with
static storage duration are forbidden: they cause hard-to-find bugs due
to indeterminate order of construction and destruction. However, such
variables are allowed if they are constexpr
: they have no
dynamic initialization or destruction.
Objects with static storage duration, including global variables, static variables, static class member variables, and function static variables, must be Plain Old Data (POD): only ints, chars, floats, or pointers, or arrays/structs of POD.
The order in which class constructors and initializers for static variables are called is only partially specified in C++ and can even change from build to build, which can cause bugs that are difficult to find. Therefore in addition to banning globals of class type, we do not allow non-local static variables to be initialized with the result of a function, unless that function (such as getenv(), or getpid()) does not itself depend on any other globals. However, a static POD variable within function scope may be initialized with the result of a function, since its initialization order is well-defined and does not occur until control passes through its declaration.
Likewise, global and static variables are destroyed
when the program terminates, regardless of whether the
termination is by returning from main()
or
by calling exit()
. The order in which
destructors are called is defined to be the reverse of
the order in which the constructors were called. Since
constructor order is indeterminate, so is destructor
order. For example, at program-end time a static variable
might have been destroyed, but code still running
— perhaps in another thread
— tries to access it and fails. Or the
destructor for a static string
variable
might be run prior to the destructor for another variable
that contains a reference to that string.
One way to alleviate the destructor problem is to
terminate the program by calling
quick_exit()
instead of exit()
.
The difference is that quick_exit()
does not
invoke destructors and does not invoke any handlers that
were registered by calling atexit()
. If you
have a handler that needs to run when a program
terminates via quick_exit()
(flushing logs,
for example), you can register it using
at_quick_exit()
. (If you have a handler that
needs to run at both exit()
and
quick_exit()
, you need to register it in
both places.)
As a result we only allow static variables to contain
POD data. This rule completely disallows
std::vector
(use C arrays instead), or
string
(use const char []
).
If you need a static or global variable of a class type, consider initializing a pointer (which will never be freed), from either your main() function or from pthread_once(). Note that this must be a raw pointer, not a "smart" pointer, since the smart pointer's destructor will have the order-of-destructor issue that we are trying to avoid.
Klassen
Classes are the fundamental unit of code in C++. Naturally, we use them extensively. This section lists the main dos and don'ts you should follow when writing a class.
Was in der Erzeugerin abgeht
Avoid virtual method calls in constructors, and avoid initialization that can fail if you can't signal an error.
Vermeide Aufrufe von virtuellen Methoden in Erzeugerinnen. Kann kein Fehler signalisiert werden, dann vermeide Initialisierung, die fehlschlagen kann.
It is possible to perform arbitrary initialization in the body of the constructor.
- No need to worry about whether the class has been initialized or not.
- Objects that are fully initialized by constructor call can
be
const
and may also be easier to use with standard containers or algorithms.
- If the work calls virtual functions, these calls will not get dispatched to the subclass implementations. Future modification to your class can quietly introduce this problem even if your class is not currently subclassed, causing much confusion.
- There is no easy way for constructors to signal errors, short of crashing the program (not always appropriate) or using exceptions (which are forbidden).
- If the work fails, we now have an object whose initialization
code failed, so it may be an unusual state requiring a
bool IsValid()
state checking mechanism (or similar) which is easy to forget to call. - You cannot take the address of a constructor, so whatever work is done in the constructor cannot easily be handed off to, for example, another thread.
Constructors should never call virtual functions. If appropriate
for your code
,
terminating the program may be an appropriate error handling
response. Otherwise, consider a factory function
or Init()
method. Avoid Init()
methods on objects with
no other states that affect which public methods may be called
(semi-constructed objects of this form are particularly hard to work
with correctly).
Implizite Parameterumwandlung
Do not define implicit conversions. Use the explicit
keyword for conversion operators and single-argument constructors.
Definiere keine implizite Umwandlung. Benutze das Keyword explicit
für Umwandlungs-Operatoren und Einzelargument-Erzeuger.
Implicit conversions allow an
object of one type (called the source type) to
be used where a different type (called the destination
type) is expected, such as when passing an
int
argument to a function that takes a
double
parameter.
In addition to the implicit conversions defined by the language,
users can define their own, by adding appropriate members to the
class definition of the source or destination type. An implicit
conversion in the source type is defined by a type conversion operator
named after the destination type (e.g. operator
bool()
). An implicit conversion in the destination
type is defined by a constructor that can take the source type as
its only argument (or only argument with no default value).
The explicit
keyword can be applied to a constructor
or (since C++11) a conversion operator, to ensure that it can only be
used when the destination type is explicit at the point of use,
e.g. with a cast. This applies not only to implicit conversions, but to
C++11's list initialization syntax:
class Foo { explicit Foo(int x, double y); ... }; void Func(Foo f);
Func({42, 3.14}); // ErrorThis kind of code isn't technically an implicit conversion, but the language treats it as one as far as
explicit
is concerned.
- Implicit conversions can make a type more usable and expressive by eliminating the need to explicitly name a type when it's obvious.
- Implicit conversions can be a simpler alternative to overloading.
- List initialization syntax is a concise and expressive way of initializing objects.
- Implicit conversions can hide type-mismatch bugs, where the destination type does not match the user's expectation, or the user is unaware that any conversion will take place.
- Implicit conversions can make code harder to read, particularly in the presence of overloading, by making it less obvious what code is actually getting called.
- Constructors that take a single argument may accidentally be usable as implicit type conversions, even if they are not intended to do so.
- When a single-argument constructor is not marked
explicit
, there's no reliable way to tell whether it's intended to define an implicit conversion, or the author simply forgot to mark it. - It's not always clear which type should provide the conversion, and if they both do, the code becomes ambiguous.
- List initialization can suffer from the same problems if the destination type is implicit, particularly if the list has only a single element.
Type conversion operators, and constructors that are
callable with a single argument, must be marked
explicit
in the class definition. As an
exception, copy and move constructors should not be
explicit
, since they do not perform type
conversion. Implicit conversions can sometimes be necessary and
appropriate for types that are designed to transparently wrap other
types. In that case, contact
your project leads to request
a waiver of this rule.
Constructors that cannot be called with a single argument
should usually omit explicit
. Constructors that
take a single std::initializer_list
parameter should
also omit explicit
, in order to support copy-initialization
(e.g. MyType m = {1, 2};
).
Kopierbare und verschiebbare Typen
Support copying and/or moving if these operations are clear and meaningful for your type. Otherwise, disable the implicitly generated special functions that perform copies and moves.
Unterstütze das Kopieren oder Verschieben, wenn diese Operationen klar und sinnvoll sind für deinen Datentyp. Falls nicht, unterdrücke die implizit generierten Spezialfunktionen, die dafür vorgesehen sind.
A copyable type allows its objects to be initialized or assigned
from any other object of the same type, without changing the value of the source.
For user-defined types, the copy behavior is defined by the copy
constructor and the copy-assignment operator.
string
is an example of a copyable type.
A movable type is one that can be initialized and assigned
from temporaries (all copyable types are therefore movable).
std::unique_ptr<int>
is an example of a movable but not
copyable type. For user-defined types, the move behavior is defined by the move
constructor and the move-assignment operator.
The copy/move constructors can be implicitly invoked by the compiler in some situations, e.g. when passing objects by value.
Objects of copyable and movable types can be passed and returned by value, which makes APIs simpler, safer, and more general. Unlike when passing objects by pointer or reference, there's no risk of confusion over ownership, lifetime, mutability, and similar issues, and no need to specify them in the contract. It also prevents non-local interactions between the client and the implementation, which makes them easier to understand, maintain, and optimize by the compiler. Further, such objects can be used with generic APIs that require pass-by-value, such as most containers, and they allow for additional flexibility in e.g., type composition.
Copy/move constructors and assignment operators are usually
easier to define correctly than alternatives
like Clone()
, CopyFrom()
or Swap()
,
because they can be generated by the compiler, either implicitly or
with = default
. They are concise, and ensure
that all data members are copied. Copy and move
constructors are also generally more efficient, because they don't
require heap allocation or separate initialization and assignment
steps, and they're eligible for optimizations such as
copy elision.
Move operations allow the implicit and efficient transfer of resources out of rvalue objects. This allows a plainer coding style in some cases.
Some types do not need to be copyable, and providing copy
operations for such types can be confusing, nonsensical, or outright
incorrect. Types representing singleton objects (Registerer
),
objects tied to a specific scope (Cleanup
), or closely coupled to
object identity (Mutex
) cannot be copied meaningfully.
Copy operations for base class types that are to be used
polymorphically are hazardous, because use of them can lead to
object slicing.
Defaulted or carelessly-implemented copy operations can be incorrect, and the
resulting bugs can be confusing and difficult to diagnose.
Copy constructors are invoked implicitly, which makes the invocation easy to miss. This may cause confusion for programmers used to languages where pass-by-reference is conventional or mandatory. It may also encourage excessive copying, which can cause performance problems.
Provide the copy and move operations if their meaning is clear to a casual user and the copying/moving does not incur unexpected costs. If you define a copy or move constructor, define the corresponding assignment operator, and vice-versa. If your type is copyable, do not define move operations unless they are significantly more efficient than the corresponding copy operations. If your type is not copyable, but the correctness of a move is obvious to users of the type, you may make the type move-only by defining both of the move operations.
If your type provides copy operations, it is recommended that you design your class so that the default implementation of those operations is correct. Remember to review the correctness of any defaulted operations as you would any other code, and to document that your class is copyable and/or cheaply movable if that's an API guarantee.
class Foo { public: Foo(Foo&& other) : field_(other.field) {} // Bad, defines only move constructor, but not operator=. private: Field field_; };
Due to the risk of slicing, avoid providing an assignment
operator or public copy/move constructor for a class that's
intended to be derived from (and avoid deriving from a class
with such members). If your base class needs to be
copyable, provide a public virtual Clone()
method, and a protected copy constructor that derived classes
can use to implement it.
If you do not want to support copy/move operations on your type,
explicitly disable them using = delete
in
the public:
section:
// MyClass is neither copyable nor movable. MyClass(const MyClass&) = delete; MyClass& operator=(const MyClass&) = delete;
Strukturen verglichen mit Klassen
Use a struct
only for passive objects that
carry data; everything else is a class
.
Nimm struct
nur für passive Objekte, die
Daten beinhalten; alles andere ist eine class
.
The struct
and class
keywords behave almost identically in C++. We add our own
semantic meanings to each keyword, so you should use the
appropriate keyword for the data-type you're
defining.
structs
should be used for passive
objects that carry data, and may have associated
constants, but lack any functionality other than
access/setting the data members. The accessing/setting of
fields is done by directly accessing the fields rather
than through method invocations. Methods should not
provide behavior but should only be used to set up the
data members, e.g., constructor, destructor,
Initialize()
, Reset()
,
Validate()
.
If more functionality is required, a
class
is more appropriate. If in doubt, make
it a class
.
For consistency with STL, you can use
struct
instead of class
for
functors and traits.
Note that member variables in structs and classes have different naming rules.
Vererbung
Composition is often more appropriate than inheritance.
When using inheritance, make it public
.
Komposition ist vielmals besser als Vererbung.
Sobald Vererbung im Spiel ist, mach sie public
.
When a sub-class inherits from a base class, it includes the definitions of all the data and operations that the parent base class defines. In practice, inheritance is used in two major ways in C++: implementation inheritance, in which actual code is inherited by the child, and interface inheritance, in which only method names are inherited.
Implementation inheritance reduces code size by re-using the base class code as it specializes an existing type. Because inheritance is a compile-time declaration, you and the compiler can understand the operation and detect errors. Interface inheritance can be used to programmatically enforce that a class expose a particular API. Again, the compiler can detect errors, in this case, when a class does not define a necessary method of the API.
For implementation inheritance, because the code implementing a sub-class is spread between the base and the sub-class, it can be more difficult to understand an implementation. The sub-class cannot override functions that are not virtual, so the sub-class cannot change implementation. The base class may also define some data members, so that specifies physical layout of the base class.
All inheritance should be public
. If you
want to do private inheritance, you should be including
an instance of the base class as a member instead.
Do not overuse implementation inheritance. Composition
is often more appropriate. Try to restrict use of
inheritance to the "is-a" case: Bar
subclasses Foo
if it can reasonably be said
that Bar
"is a kind of"
Foo
.
Make your destructor virtual
if
necessary. If your class has virtual methods, its
destructor should be virtual.
Limit the use of protected
to those
member functions that might need to be accessed from
subclasses. Note that data
members should be private.
Explicitly annotate overrides of virtual functions
or virtual destructors with an override
or (less frequently) final
specifier.
Older (pre-C++11) code will use the
virtual
keyword as an inferior
alternative annotation. For clarity, use exactly one of
override
, final
, or
virtual
when declaring an override.
Rationale: A function or destructor marked
override
or final
that is
not an override of a base class virtual function will
not compile, and this helps catch common errors. The
specifiers serve as documentation; if no specifier is
present, the reader has to check all ancestors of the
class in question to determine if the function or
destructor is virtual or not.
Mehrfache Vererbung
Only very rarely is multiple implementation inheritance
actually useful. We allow multiple inheritance only when at
most one of the base classes has an implementation; all
other base classes must be pure
interface classes tagged with the
Interface
suffix.
Nur selten ist die mehrfache Vererbung echt nützlich.
Wir erlauben mehrfache Vererbung nur, wenn maximal eine Basisklasse
eine Implementation trägt und wenn alle anderen Basisklassen
reine Schnittstellen sind mit dem Namenszusatz
Interface
.
Multiple inheritance allows a sub-class to have more than one base class. We distinguish between base classes that are pure interfaces and those that have an implementation.
Multiple implementation inheritance may let you re-use even more code than single inheritance (see Inheritance).
Only very rarely is multiple implementation inheritance actually useful. When multiple implementation inheritance seems like the solution, you can usually find a different, more explicit, and cleaner solution.
Multiple inheritance is allowed only when all
superclasses, with the possible exception of the first one,
are pure interfaces. In order to
ensure that they remain pure interfaces, they must end with
the Interface
suffix.
There is an exception to this rule on Windows.
Schnittstellen
Classes that satisfy certain conditions are allowed, but
not required, to end with an Interface
suffix.
Klassen, die gewisse Bedingungen erfüllen, dürfen den Namenszusatz
Interface
tragen, müssen aber nicht.
A class is a pure interface if it meets the following requirements:
- It has only public pure virtual ("
= 0
") methods and static methods (but see below for destructor). - It may not have non-static data members.
- It need not have any constructors defined. If a constructor is provided, it must take no arguments and it must be protected.
- If it is a subclass, it may only be derived from
classes that satisfy these conditions and are tagged
with the
Interface
suffix.
An interface class can never be directly instantiated because of the pure virtual method(s) it declares. To make sure all implementations of the interface can be destroyed correctly, the interface must also declare a virtual destructor (in an exception to the first rule, this should not be pure). See Stroustrup, The C++ Programming Language, 3rd edition, section 12.4 for details.
Tagging a class with the Interface
suffix
lets others know that they must not add implemented
methods or non static data members. This is particularly
important in the case of multiple inheritance.
Additionally, the interface concept is already
well-understood by Java programmers.
The Interface
suffix lengthens the class
name, which can make it harder to read and understand.
Also, the interface property may be considered an
implementation detail that shouldn't be exposed to
clients.
A class may end
with Interface
only if it meets the above
requirements. We do not require the converse, however:
classes that meet the above requirements are not required
to end with Interface
.
Überladung von Operatoren
Overload operators judiciously. Do not create user-defined literals.
Überlade Operatoren mit Bedacht. Kreiere keine benutzerdefinierten Wortketten.
C++ permits user code to
declare
overloaded versions of the built-in operators using the
operator
keyword, so long as one of the parameters
is a user-defined type. The operator
keyword also
permits user code to define new kinds of literals using
operator""
, and to define type-conversion functions
such as operator bool()
.
Operator overloading can make code more concise and
intuitive by enabling user-defined types to behave the same
as built-in types. Overloaded operators are the idiomatic names
for certain operations (e.g. ==
, <
,
=
, and <<
), and adhering to
those conventions can make user-defined types more readable
and enable them to interoperate with libraries that expect
those names.
User-defined literals are a very concise notation for creating objects of user-defined types.
- Providing a correct, consistent, and unsurprising set of operator overloads requires some care, and failure to do so can lead to confusion and bugs.
- Overuse of operators can lead to obfuscated code, particularly if the overloaded operator's semantics don't follow convention.
- The hazards of function overloading apply just as much to operator overloading, if not more so.
- Operator overloads can fool our intuition into thinking that expensive operations are cheap, built-in operations.
- Finding the call sites for overloaded operators may require a search tool that's aware of C++ syntax, rather than e.g. grep.
- If you get the argument type of an overloaded operator
wrong, you may get a different overload rather than a
compiler error. For example,
foo < bar
may do one thing, while&foo < &bar
does something totally different. - Certain operator overloads are inherently hazardous.
Overloading unary
&
can cause the same code to have different meanings depending on whether the overload declaration is visible. Overloads of&&
,||
, and,
(comma) cannot match the evaluation-order semantics of the built-in operators. - Operators are often defined outside the class, so there's a risk of different files introducing different definitions of the same operator. If both definitions are linked into the same binary, this results in undefined behavior, which can manifest as subtle run-time bugs.
- User-defined literals allow the creation of new syntactic forms that are unfamiliar even to experienced C++ programmers.
Define overloaded operators only if their meaning is
obvious, unsurprising, and consistent with the corresponding
built-in operators. For example, use |
as a
bitwise- or logical-or, not as a shell-style pipe.
Define operators only on your own types. More precisely,
define them in the same headers, .cc files, and namespaces
as the types they operate on. That way, the operators are available
wherever the type is, minimizing the risk of multiple
definitions. If possible, avoid defining operators as templates,
because they must satisfy this rule for any possible template
arguments. If you define an operator, also define
any related operators that make sense, and make sure they
are defined consistently. For example, if you overload
<
, overload all the comparison operators,
and make sure <
and >
never
return true for the same arguments.
Prefer to define non-modifying binary operators as
non-member functions. If a binary operator is defined as a
class member, implicit conversions will apply to the
right-hand argument, but not the left-hand one. It will
confuse your users if a < b
compiles but
b < a
doesn't.
Don't go out of your way to avoid defining operator
overloads. For example, prefer to define ==
,
=
, and <<
, rather than
Equals()
, CopyFrom()
, and
PrintTo()
. Conversely, don't define
operator overloads just because other libraries expect
them. For example, if your type doesn't have a natural
ordering, but you want to store it in a std::set
,
use a custom comparator rather than overloading
<
.
Do not overload &&
, ||
,
,
(comma), or unary &
. Do not overload
operator""
, i.e. do not introduce user-defined
literals.
Type conversion operators are covered in the section on
implicit conversions.
The =
operator is covered in the section on
copy constructors. Overloading
<<
for use with streams is covered in the
section on streams. See also the rules on
function overloading, which
apply to operator overloading as well.
Zugriffskontrolle
Make data members private
, unless they are
static const
(and follow the
naming convention for constants). For technical
reasons, we allow data members of a test fixture class to
be protected
when using
Google
Test).
Mach Daten-Member private
, ausser sie sind
static const
(und folge
Namensgebung für Konstanten). Aus technischen Gründen
erlauben wir protected
für Data-Member in einer Testklasse
bei Verwendung von
Google Test).
Reihenfolge der Deklaration
Group similar declarations together, placing public parts earlier.
Gruppiere ähnliche Deklarationen zusammen und platziere
die öffentlichen (public
) Teile am Anfang.
A class definition should usually start with a
public:
section, followed by
protected:
, then private:
. Omit
sections that would be empty.
Within each section, generally prefer grouping similar
kinds of declarations together, and generally prefer the
following order: types (including typedef
,
using
, and nested structs and classes),
constants, factory functions, constructors, assignment
operators, destructor, all other methods, data members.
Do not put large method definitions inline in the class definition. Usually, only trivial or performance-critical, and very short, methods may be defined inline. See Inline Functions for more details.
Funktionen
Reihenfolge der Parameter
When defining a function, parameter order is: inputs, then outputs.
Bei der Definition von Funktionen ist die Reihenfolge der Parameter: zuerst Eingabe-, dann Ausgabeparameter.
Parameters to C/C++ functions are either input to the
function, output from the function, or both. Input
parameters are usually values or const
references, while output and input/output parameters will
be pointers to non-const
. When ordering
function parameters, put all input-only parameters before
any output parameters. In particular, do not add new
parameters to the end of the function just because they
are new; place new input-only parameters before the
output parameters.
This is not a hard-and-fast rule. Parameters that are both input and output (often classes/structs) muddy the waters, and, as always, consistency with related functions may require you to bend the rule.
Schreibe kurze Funktionen
Prefer small and focused functions.
Bevorzuge kleine und auf-den-Punkt Funktionen.
We recognize that long functions are sometimes appropriate, so no hard limit is placed on functions length. If a function exceeds about 40 lines, think about whether it can be broken up without harming the structure of the program.
Even if your long function works perfectly now, someone modifying it in a few months may add new behavior. This could result in bugs that are hard to find. Keeping your functions short and simple makes it easier for other people to read and modify your code.
You could find long and complicated functions when working with some code. Do not be intimidated by modifying existing code: if working with such a function proves to be difficult, you find that errors are hard to debug, or you want to use a piece of it in several different contexts, consider breaking up the function into smaller and more manageable pieces.
Argumente als Referenzen
All parameters passed by reference must be labeled
const
.
Alle Parameter, die per Referenz übergeben werden, müssen als
const
deklariert sein.
In C, if a
function needs to modify a variable, the parameter must
use a pointer, eg int foo(int *pval)
. In
C++, the function can alternatively declare a reference
parameter: int foo(int &val)
.
Defining a parameter as reference avoids ugly code like
(*pval)++
. Necessary for some applications
like copy constructors. Makes it clear, unlike with
pointers, that a null pointer is not a possible
value.
References can be confusing, as they have value syntax but pointer semantics.
Within function parameter lists all references must be
const
:
void Foo(const string &in, string *out);
In fact it is a very strong convention in Google code
that input arguments are values or const
references while output arguments are pointers. Input
parameters may be const
pointers, but we
never allow non-const
reference parameters
except when required by convention, e.g.,
swap()
.
However, there are some instances where using
const T*
is preferable to const
T&
for input parameters. For example:
- You want to pass in a null pointer.
- The function saves a pointer or reference to the input.
Remember that most of the time input
parameters are going to be specified as const
T&
. Using const T*
instead
communicates to the reader that the input is somehow
treated differently. So if you choose const
T*
rather than const T&
, do so
for a concrete reason; otherwise it will likely confuse
readers by making them look for an explanation that
doesn't exist.
Überladen von Funktionen
Use overloaded functions (including constructors) only if a reader looking at a call site can get a good idea of what is happening without having to first figure out exactly which overload is being called.
Benutze die Überladung von Funktionen (auch Erzeugerinnen) nur, wenn es für den Leser klar ist, in welche überladene Funktion an einer Aufrufstelle wirklich verzweigt wird.
You may write a function that takes a const
string&
and overload it with another that
takes const char*
.
class MyClass { public: void Analyze(const string &text); void Analyze(const char *text, size_t textlen); };
Overloading can make code more intuitive by allowing an identically-named function to take different arguments. It may be necessary for templatized code, and it can be convenient for Visitors.
If a function is overloaded by the argument types alone, a reader may have to understand C++'s complex matching rules in order to tell what's going on. Also many people are confused by the semantics of inheritance if a derived class overrides only some of the variants of a function.
If you want to overload a function, consider qualifying
the name with some information about the arguments, e.g.,
AppendString()
, AppendInt()
rather than just Append()
. If you are
overloading a function to support variable number of
arguments of the same type, consider making it take a
std::vector
so that the user can use an
initializer list
to specify the arguments.
Standardwerte für Argumente
Default arguments are allowed on non-virtual functions when the default is guaranteed to always have the same value. Follow the same restrictions as for function overloading, and prefer overloaded functions if the readability gained with default arguments doesn't outweigh the downsides below.
Standardwerte für Argumente sind erlaubt in nicht-virtuellen Funktionen, wenn die Evaluation des Standardwerts immer zum gleichen Resultat führt. Es gelten die gleichen Einschränkung wie für Überladen von Funktionen. Benutze lieber überladene Funktionen, wenn die gewonnene Lesbarkeit mit Standardwerten nicht deren Nachteile überwiegt (s. unten).
Often you have a function that uses default values, but occasionally you want to override the defaults. Default parameters allow an easy way to do this without having to define many functions for the rare exceptions. Compared to overloading the function, default arguments have a cleaner syntax, with less boilerplate and a clearer distinction between 'required' and 'optional' arguments.
Defaulted arguments are another way to achieve the semantics of overloaded functions, so all the reasons not to overload functions apply.
The defaults for arguments in a virtual function call are determined by the static type of the target object, and there's no guarantee that all overrides of a given function declare the same defaults.
Default parameters are re-evaluated at each call site, which can bloat the generated code. Readers may also expect the default's value to be fixed at the declaration instead of varying at each call.
Function pointers are confusing in the presence of default arguments, since the function signature often doesn't match the call signature. Adding function overloads avoids these problems.
Default arguments are banned on virtual functions, where
they don't work properly, and in cases where the specified
default might not evaluate to the same value depending on
when it was evaluated. (For example, don't write void
f(int n = counter++);
.)
In some other cases, default arguments can improve the readability of their function declarations enough to overcome the downsides above, so they are allowed. When in doubt, use overloads.
Neue Syntax mit hintangestelltem Rückgabetyp
Use trailing return types only where using the ordinary syntax (leading return types) is impractical or much less readable.
Benutze die hintangestellten Rückgabetypen nur, wenn die gewöhnliche Schreibweise (vorangestellter Rückgabetyp) unpraktisch oder viel weniger lesbar ist.
C++ allows two different forms of function declarations. In the older form, the return type appears before the function name. For example:
int foo(int x);
The new form, introduced in C++11, uses the auto
keyword before the function name and a trailing return type after
the argument list. For example, the declaration above could
equivalently be written:
auto foo(int x) -> int;
The trailing return type is in the function's scope. This doesn't
make a difference for a simple case like int
but it matters
for more complicated cases, like types declared in class scope or
types written in terms of the function parameters.
Trailing return types are the only way to explicitly specify the return type of a lambda expression. In some cases the compiler is able to deduce a lambda's return type, but not in all cases. Even when the compiler can deduce it automatically, sometimes specifying it explicitly would be clearer for readers.
Sometimes it's easier and more readable to specify a return type after the function's parameter list has already appeared. This is particularly true when the return type depends on template parameters. For example:
template <class T, class U> auto add(T t, U u) -> decltype(t + u);versus
template <class T, class U> decltype(declval<T&>() + declval<U&>()) add(T t, U u);
Trailing return type syntax is relatively new and it has no analogue in C++-like languages like C and Java, so some readers may find it unfamiliar.
Existing code bases have an enormous number of function declarations that aren't going to get changed to use the new syntax, so the realistic choices are using the old syntax only or using a mixture of the two. Using a single version is better for uniformity of style.
In most cases, continue to use the older style of function declaration where the return type goes before the function name. Use the new trailing-return-type form only in cases where it's required (such as lambdas) or where, by putting the type after the function's parameter list, it allows you to write the type in a much more readable way. The latter case should be rare; it's mostly an issue in fairly complicated template code, which is discouraged in most cases.
Google eigene Magie
There are various tricks and utilities that we use to make C++ code more robust, and various ways we use C++ that may differ from what you see elsewhere.
Besitztum und schlaue Zeiger
Prefer to have single, fixed owners for dynamically allocated objects. Prefer to transfer ownership with smart pointers.
Bevorzuge einzelne und fest zugewiesene Besitzer für dynamisch erstellte Objekte. Wird das Objekt an einen anderen Besitzer übergeben, dann mit schlauen Pointern.
"Ownership" is a bookkeeping technique for managing dynamically allocated memory (and other resources). The owner of a dynamically allocated object is an object or function that is responsible for ensuring that it is deleted when no longer needed. Ownership can sometimes be shared, in which case the last owner is typically responsible for deleting it. Even when ownership is not shared, it can be transferred from one piece of code to another.
"Smart" pointers are classes that act like pointers,
e.g. by overloading the *
and
->
operators. Some smart pointer types
can be used to automate ownership bookkeeping, to ensure
these responsibilities are met.
std::unique_ptr
is a smart pointer type
introduced in C++11, which expresses exclusive ownership
of a dynamically allocated object; the object is deleted
when the std::unique_ptr
goes out of scope.
It cannot be copied, but can be moved to
represent ownership transfer.
std::shared_ptr
is a smart pointer type
that expresses shared ownership of
a dynamically allocated object. std::shared_ptr
s
can be copied; ownership of the object is shared among
all copies, and the object is deleted when the last
std::shared_ptr
is destroyed.
- It's virtually impossible to manage dynamically allocated memory without some sort of ownership logic.
- Transferring ownership of an object can be cheaper than copying it (if copying it is even possible).
- Transferring ownership can be simpler than 'borrowing' a pointer or reference, because it reduces the need to coordinate the lifetime of the object between the two users.
- Smart pointers can improve readability by making ownership logic explicit, self-documenting, and unambiguous.
- Smart pointers can eliminate manual ownership bookkeeping, simplifying the code and ruling out large classes of errors.
- For const objects, shared ownership can be a simple and efficient alternative to deep copying.
- Ownership must be represented and transferred via pointers (whether smart or plain). Pointer semantics are more complicated than value semantics, especially in APIs: you have to worry not just about ownership, but also aliasing, lifetime, and mutability, among other issues.
- The performance costs of value semantics are often overestimated, so the performance benefits of ownership transfer might not justify the readability and complexity costs.
- APIs that transfer ownership force their clients into a single memory management model.
- Code using smart pointers is less explicit about where the resource releases take place.
std::unique_ptr
expresses ownership transfer using C++11's move semantics, which are relatively new and may confuse some programmers.- Shared ownership can be a tempting alternative to careful ownership design, obfuscating the design of a system.
- Shared ownership requires explicit bookkeeping at run-time, which can be costly.
- In some cases (e.g. cyclic references), objects with shared ownership may never be deleted.
- Smart pointers are not perfect substitutes for plain pointers.
If dynamic allocation is necessary, prefer to keep
ownership with the code that allocated it. If other code
needs access to the object, consider passing it a copy,
or passing a pointer or reference without transferring
ownership. Prefer to use std::unique_ptr
to
make ownership transfer explicit. For example:
std::unique_ptr<Foo> FooFactory(); void FooConsumer(std::unique_ptr<Foo> ptr);
Do not design your code to use shared ownership
without a very good reason. One such reason is to avoid
expensive copy operations, but you should only do this if
the performance benefits are significant, and the
underlying object is immutable (i.e.
std::shared_ptr<const Foo>
). If you
do use shared ownership, prefer to use
std::shared_ptr
.
Never use std::auto_ptr
. Instead, use
std::unique_ptr
.
cpplint
Use cpplint.py
to detect style errors.
Um Abweichungen vom Stil zu verfolgen,
benutze cpplint.py
.
cpplint.py
is a tool that reads a source file and identifies many
style errors. It is not perfect, and has both false
positives and false negatives, but it is still a valuable
tool. False positives can be ignored by putting //
NOLINT
at the end of the line or
// NOLINTNEXTLINE
in the previous line.
Some projects have instructions on
how to run cpplint.py
from their project
tools. If the project you are contributing to does not,
you can download
cpplint.py
separately.
Andere C++ Besonderheiten
Referenzen auf R-Werte
Use rvalue references only to define move constructors and move assignment operators, or for perfect forwarding.
Benutze Referenzen auf R-Werte nur, um Verschiebe-Erzeugerinnen und Verschiebe-Zuweisungsoperatoren zu definieren; Oder auch für das perfekte forwarding (TODO).
Rvalue references
are a type of reference that can only bind to temporary
objects. The syntax is similar to traditional reference
syntax. For example, void f(string&&
s);
declares a function whose argument is an
rvalue reference to a string.
- Defining a move constructor (a constructor taking
an rvalue reference to the class type) makes it
possible to move a value instead of copying it. If
v1
is astd::vector<string>
, for example, thenauto v2(std::move(v1))
will probably just result in some simple pointer manipulation instead of copying a large amount of data. In some cases this can result in a major performance improvement. - Rvalue references make it possible to write a generic function wrapper that forwards its arguments to another function, and works whether or not its arguments are temporary objects. (This is sometimes called "perfect forwarding".)
- Rvalue references make it possible to implement types that are movable but not copyable, which can be useful for types that have no sensible definition of copying but where you might still want to pass them as function arguments, put them in containers, etc.
std::move
is necessary to make effective use of some standard-library types, such asstd::unique_ptr
.
- Rvalue references are a relatively new feature (introduced as part of C++11), and not yet widely understood. Rules like reference collapsing, and automatic synthesis of move constructors, are complicated.
Use rvalue references only to define move constructors and move assignment
operators (as described in Copyable and
Movable Types) and, in conjunction with std::forward
,
to support perfect forwarding. You may use std::move
to express
moving a value from one object to another rather than copying it.
Freunde
We allow use of friend
classes and functions,
within reason.
Wir erlauben das massvolle Benutzen von Klassen und Funktionen mit
friend
-Deklaration.
Friends should usually be defined in the same file so
that the reader does not have to look in another file to
find uses of the private members of a class. A common use
of friend
is to have a
FooBuilder
class be a friend of
Foo
so that it can construct the inner state
of Foo
correctly, without exposing this
state to the world. In some cases it may be useful to
make a unittest class a friend of the class it tests.
Friends extend, but do not break, the encapsulation boundary of a class. In some cases this is better than making a member public when you want to give only one other class access to it. However, most classes should interact with other classes solely through their public members.
Ausnahmen
We do not use C++ exceptions.
Wir verwenden keine C++-Ausnahmen.
- Exceptions allow higher levels of an application to decide how to handle "can't happen" failures in deeply nested functions, without the obscuring and error-prone bookkeeping of error codes.
- Exceptions are used by most other modern languages. Using them in C++ would make it more consistent with Python, Java, and the C++ that others are familiar with.
- Some third-party C++ libraries use exceptions, and turning them off internally makes it harder to integrate with those libraries.
- Exceptions are the only way for a constructor to
fail. We can simulate this with a factory function or
an
Init()
method, but these require heap allocation or a new "invalid" state, respectively. - Exceptions are really handy in testing frameworks.
- When you add a
throw
statement to an existing function, you must examine all of its transitive callers. Either they must make at least the basic exception safety guarantee, or they must never catch the exception and be happy with the program terminating as a result. For instance, iff()
callsg()
callsh()
, andh
throws an exception thatf
catches,g
has to be careful or it may not clean up properly. - More generally, exceptions make the control flow of programs difficult to evaluate by looking at code: functions may return in places you don't expect. This causes maintainability and debugging difficulties. You can minimize this cost via some rules on how and where exceptions can be used, but at the cost of more that a developer needs to know and understand.
- Exception safety requires both RAII and different coding practices. Lots of supporting machinery is needed to make writing correct exception-safe code easy. Further, to avoid requiring readers to understand the entire call graph, exception-safe code must isolate logic that writes to persistent state into a "commit" phase. This will have both benefits and costs (perhaps where you're forced to obfuscate code to isolate the commit). Allowing exceptions would force us to always pay those costs even when they're not worth it.
- Turning on exceptions adds data to each binary produced, increasing compile time (probably slightly) and possibly increasing address space pressure.
- The availability of exceptions may encourage developers to throw them when they are not appropriate or recover from them when it's not safe to do so. For example, invalid user input should not cause exceptions to be thrown. We would need to make the style guide even longer to document these restrictions!
On their face, the benefits of using exceptions outweigh the costs, especially in new projects. However, for existing code, the introduction of exceptions has implications on all dependent code. If exceptions can be propagated beyond a new project, it also becomes problematic to integrate the new project into existing exception-free code. Because most existing C++ code at Google is not prepared to deal with exceptions, it is comparatively difficult to adopt new code that generates exceptions.
Given that Google's existing code is not exception-tolerant, the costs of using exceptions are somewhat greater than the costs in a new project. The conversion process would be slow and error-prone. We don't believe that the available alternatives to exceptions, such as error codes and assertions, introduce a significant burden.
Our advice against using exceptions is not predicated on philosophical or moral grounds, but practical ones. Because we'd like to use our open-source projects at Google and it's difficult to do so if those projects use exceptions, we need to advise against exceptions in Google open-source projects as well. Things would probably be different if we had to do it all over again from scratch.
This prohibition also applies to the exception-related
features added in C++11, such as noexcept
,
std::exception_ptr
, and
std::nested_exception
.
There is an exception to this rule (no pun intended) for Windows code.
Laufzeittypinformation (Run-Time Type Information oder RTTI)
Avoid using Run Time Type Information (RTTI).
Lass ab von der Laufzeittypinformation (Run Time Type Information oder RTTI).
RTTI allows a
programmer to query the C++ class of an object at run
time. This is done by use of typeid
or
dynamic_cast
.
Querying the type of an object at run-time frequently means a design problem. Needing to know the type of an object at runtime is often an indication that the design of your class hierarchy is flawed.
Undisciplined use of RTTI makes code hard to maintain. It can lead to type-based decision trees or switch statements scattered throughout the code, all of which must be examined when making further changes.
The standard alternatives to RTTI (described below) require modification or redesign of the class hierarchy in question. Sometimes such modifications are infeasible or undesirable, particularly in widely-used or mature code.
RTTI can be useful in some unit tests. For example, it is useful in tests of factory classes where the test has to verify that a newly created object has the expected dynamic type. It is also useful in managing the relationship between objects and their mocks.
RTTI is useful when considering multiple abstract objects. Consider
bool Base::Equal(Base* other) = 0; bool Derived::Equal(Base* other) { Derived* that = dynamic_cast<Derived*>(other); if (that == NULL) return false; ... }
RTTI has legitimate uses but is prone to abuse, so you must be careful when using it. You may use it freely in unittests, but avoid it when possible in other code. In particular, think twice before using RTTI in new code. If you find yourself needing to write code that behaves differently based on the class of an object, consider one of the following alternatives to querying the type:
- Virtual methods are the preferred way of executing different code paths depending on a specific subclass type. This puts the work within the object itself.
- If the work belongs outside the object and instead in some processing code, consider a double-dispatch solution, such as the Visitor design pattern. This allows a facility outside the object itself to determine the type of class using the built-in type system.
When the logic of a program guarantees that a given
instance of a base class is in fact an instance of a
particular derived class, then a
dynamic_cast
may be used freely on the
object. Usually one
can use a static_cast
as an alternative in
such situations.
Decision trees based on type are a strong indication that your code is on the wrong track.
if (typeid(*data) == typeid(D1)) { ... } else if (typeid(*data) == typeid(D2)) { ... } else if (typeid(*data) == typeid(D3)) { ...
Code such as this usually breaks when additional subclasses are added to the class hierarchy. Moreover, when properties of a subclass change, it is difficult to find and modify all the affected code segments.
Do not hand-implement an RTTI-like workaround. The arguments against RTTI apply just as much to workarounds like class hierarchies with type tags. Moreover, workarounds disguise your true intent.
Typumwandlung
Use C++-style casts
like static_cast<float>(double_value)
, or brace
initialization for conversion of arithmetic types like
int64 y = int64{1} << 42
. Do not use
cast formats like
int y = (int)x
or int y = int(x)
(but the latter
is okay when invoking a constructor of a class type).
Benutze die C++-Typumwandlungen
wie static_cast<float>(double_value)
oder die
Initialisierung mittels geschwungener Klammern für die Umwandlung
von arithmetischen Ausdrücken:
int64 y = int64{1} << 42
.
Versuche nicht, Typumwandlungsformate wie die folgenden zu benutzen:
int y = (int)x
oder int y = int(x)
(eigentlich ist der zweite Ausdruck gültig für den Aufruf einer Erzeugerin
einer Klasse).
C++ introduced a different cast system from C that distinguishes the types of cast operations.
The problem with C casts is the ambiguity of the operation;
sometimes you are doing a conversion
(e.g., (int)3.5
) and sometimes you are doing
a cast (e.g., (int)"hello"
). Brace
initialization and C++ casts can often help avoid this
ambiguity. Additionally, C++ casts are more visible when searching for
them.
The C++-style cast syntax is verbose and cumbersome.
Do not use C-style casts. Instead, use these C++-style casts when explicit type conversion is necessary.
- Use brace initialization to convert arithmetic types
(e.g.
int64{x}
). This is the safest approach because code will not compile if conversion can result in information loss. The syntax is also concise. - Use
static_cast
as the equivalent of a C-style cast that does value conversion, when you need to explicitly up-cast a pointer from a class to its superclass, or when you need to explicitly cast a pointer from a superclass to a subclass. In this last case, you must be sure your object is actually an instance of the subclass. - Use
const_cast
to remove theconst
qualifier (see const). - Use
reinterpret_cast
to do unsafe conversions of pointer types to and from integer and other pointer types. Use this only if you know what you are doing and you understand the aliasing issues.
See the
RTTI section for guidance on the use of
dynamic_cast
.
Datenströme
Use streams where appropriate, and stick to "simple" usages.
Verwende Datenströme, wenn angebracht, und bleibe bei "simpler" Benutzung.
Streams are the standard I/O abstraction in C++, as
exemplified by the standard header <iostream>
.
They are widely used in Google code, but only for debug logging
and test diagnostics.
The <<
and >>
stream operators provide an API for formatted I/O that
is easily learned, portable, reusable, and extensible.
printf
, by contrast, doesn't even support
string
, to say nothing of user-defined types,
and is very difficult to use portably.
printf
also obliges you to choose among the
numerous slightly different versions of that function,
and navigate the dozens of conversion specifiers.
Streams provide first-class support for console I/O
via std::cin
, std::cout
,
std::cerr
, and std::clog
.
The C APIs do as well, but are hampered by the need to
manually buffer the input.
- Stream formatting can be configured by mutating the state of the stream. Such mutations are persistent, so the behavior of your code can be affected by the entire previous history of the stream, unless you go out of your way to restore it to a known state every time other code might have touched it. User code can not only modify the built-in state, it can add new state variables and behaviors through a registration system.
- It is difficult to precisely control stream output, due to the above issues, the way code and data are mixed in streaming code, and the use of operator overloading (which may select a different overload than you expect).
- The practice of building up output through chains
of
<<
operators interferes with internationalization, because it bakes word order into the code, and streams' support for localization is flawed. - The streams API is subtle and complex, so programmers must develop experience with it in order to use it effectively. However, streams were historically banned in Google code (except for logging and diagnostics), so Google engineers tend not to have that experience. Consequently, streams-based code is likely to be less readable and maintainable by Googlers than code based on more familiar abstractions.
- Resolving the many overloads of
<<
is extremely costly for the compiler. When used pervasively in a large code base, it can consume as much as 20% of the parsing and semantic analysis time.
Use streams only when they are the best tool for the job. This is typically the case when the I/O is ad-hoc, local, human-readable, and targeted at other developers rather than end-users. Be consistent with the code around you, and with the codebase as a whole; if there's an established tool for your problem, use that tool instead.
Avoid using streams for I/O that faces external users or handles untrusted data. Instead, find and use the appropriate templating libraries to handle issues like internationalization, localization, and security hardening.
If you do use streams, avoid the stateful parts of the
streams API (other than error state), such as imbue()
,
xalloc()
, and register_callback()
.
Use explicit formatting functions rather than
stream manipulators or formatting flags to control formatting
details such as number base, precision, or padding.
Overload <<
as a streaming operator
for your type only if your type represents a value, and
<<
writes out a human-readable string
representation of that value. Avoid exposing implementation
details in the output of <<
; if you need to print
object internals for debugging, use named functions instead
(a method named DebugString()
is the most common
convention).
Präinkrement and Prädekrement
Use prefix form (++i
) of the increment and
decrement operators with iterators and other template
objects.
Nimm die Präfixform (++i
) des Inkrement-
und Dekrementoperators im Umfeld von Iteratoren oder anderen Vorlagenobjekten.
When a variable
is incremented (++i
or i++
) or
decremented (--i
or i--
) and
the value of the expression is not used, one must decide
whether to preincrement (decrement) or postincrement
(decrement).
When the return value is ignored, the "pre" form
(++i
) is never less efficient than the
"post" form (i++
), and is often more
efficient. This is because post-increment (or decrement)
requires a copy of i
to be made, which is
the value of the expression. If i
is an
iterator or other non-scalar type, copying i
could be expensive. Since the two types of increment
behave the same when the value is ignored, why not just
always pre-increment?
The tradition developed, in C, of using post-increment
when the expression value is not used, especially in
for
loops. Some find post-increment easier
to read, since the "subject" (i
) precedes
the "verb" (++
), just like in English.
For simple scalar (non-object) values there is no reason to prefer one form and we allow either. For iterators and other template types, use pre-increment.
Die Benutzung von const
Use const
whenever it makes sense. With C++11,
constexpr
is a better choice for some uses of
const.
Wann immer es Sinn macht, benutze const
. In C++11 ist
constexpr
manchmal die bessere Variante.
Declared variables and parameters can be preceded
by the keyword const
to indicate the variables
are not changed (e.g., const int foo
). Class
functions can have the const
qualifier to
indicate the function does not change the state of the
class member variables (e.g., class Foo { int
Bar(char c) const; };
).
Easier for people to understand how variables are being used. Allows the compiler to do better type checking, and, conceivably, generate better code. Helps people convince themselves of program correctness because they know the functions they call are limited in how they can modify your variables. Helps people know what functions are safe to use without locks in multi-threaded programs.
const
is viral: if you pass a
const
variable to a function, that function
must have const
in its prototype (or the
variable will need a const_cast
). This can
be a particular problem when calling library
functions.
const
variables, data members, methods
and arguments add a level of compile-time type checking;
it is better to detect errors as soon as possible.
Therefore we strongly recommend that you use
const
whenever it makes sense to do so:
- If a function guarantees that it will not modify an argument
passed by reference or by pointer, the corresponding function parameter
should be a reference-to-const (
const T&
) or pointer-to-const (const T*
), respectively. - Declare methods to be
const
whenever possible. Accessors should almost always beconst
. Other methods should be const if they do not modify any data members, do not call any non-const
methods, and do not return a non-const
pointer or non-const
reference to a data member. - Consider making data members
const
whenever they do not need to be modified after construction.
The mutable
keyword is allowed but is
unsafe when used with threads, so thread safety should be
carefully considered first.
Wohin mit const
Some people favor the form int const *foo
to const int* foo
. They argue that this is
more readable because it's more consistent: it keeps the
rule that const
always follows the object
it's describing. However, this consistency argument
doesn't apply in codebases with few deeply-nested pointer
expressions since most const
expressions
have only one const
, and it applies to the
underlying value. In such cases, there's no consistency
to maintain. Putting the const
first is
arguably more readable, since it follows English in
putting the "adjective" (const
) before the
"noun" (int
).
That said, while we encourage putting
const
first, we do not require it. But be
consistent with the code around you!
Die Benutzung von constexpr
In C++11, use constexpr
to define true
constants or to ensure constant initialization.
In C++11 benutze constexpr
um wirkliche
Konstanten zu definieren oder um deren Initialisierung sicher zu stellen.
Some variables can be declared constexpr
to indicate the variables are true constants, i.e. fixed at
compilation/link time. Some functions and constructors
can be declared constexpr
which enables them
to be used in defining a constexpr
variable.
Use of constexpr
enables definition of
constants with floating-point expressions rather than
just literals; definition of constants of user-defined
types; and definition of constants with function
calls.
Prematurely marking something as constexpr may cause migration problems if later on it has to be downgraded. Current restrictions on what is allowed in constexpr functions and constructors may invite obscure workarounds in these definitions.
constexpr
definitions enable a more
robust specification of the constant parts of an
interface. Use constexpr
to specify true
constants and the functions that support their
definitions. Avoid complexifying function definitions to
enable their use with constexpr
. Do not use
constexpr
to force inlining.
Ganzzahltypen
Of the built-in C++ integer types, the only one used
is
int
. If a program needs a variable of a
different size, use
a precise-width integer type from
<stdint.h>
, such as
int16_t
. If your variable represents a
value that could ever be greater than or equal to 2^31
(2GiB), use a 64-bit type such as
int64_t
.
Keep in mind that even if your value won't ever be too large
for an int
, it may be used in intermediate
calculations which may require a larger type. When in doubt,
choose a larger type.
Von den eingebauten C++ Ganzzahltypen benutze
nur int
. Wenn eine Programm eine Variable von einer
anderen Grösse braucht, dann nimm die präzisen Ganzzahltypen
wie in <stdint.h>
definiert (z.B.
int16_t
). Sofern Werte deiner Variable grösser als
2^31 (2GiB) werden könnten, dann benutze einen 64-Bit Datentyp
wie int64_t
.
Beachte aber, dass auch wenn die Werte nie grösser werden als
für einen int
möglich ist, es Zwischenwerte in
Berechnungen geben könnte, die einen grösseren Wert darstellen.
Wenn Zweifel bestehen, wähle vorsichtshalber den grösseren
Datentyp.
C++ does not specify the sizes of its integer types.
Typically people assume that short
is 16 bits,
int
is 32 bits, long
is 32 bits
and long long
is 64 bits.
Uniformity of declaration.
The sizes of integral types in C++ can vary based on compiler and architecture.
<stdint.h>
defines types
like int16_t
, uint32_t
,
int64_t
, etc. You should always use
those in preference to short
, unsigned
long long
and the like, when you need a guarantee
on the size of an integer. Of the C integer types, only
int
should be used. When appropriate, you
are welcome to use standard types like
size_t
and ptrdiff_t
.
We use int
very often, for integers we
know are not going to be too big, e.g., loop counters.
Use plain old int
for such things. You
should assume that an int
is
at least 32 bits, but don't
assume that it has more than 32 bits. If you need a 64-bit
integer type, use
int64_t
or
uint64_t
.
For integers we know can be "big",
use
int64_t
.
You should not use the unsigned integer types such as
uint32_t
, unless there is a valid
reason such as representing a bit pattern rather than a
number, or you need defined overflow modulo 2^N. In
particular, do not use unsigned types to say a number
will never be negative. Instead, use
assertions for this.
If your code is a container that returns a size, be sure to use a type that will accommodate any possible usage of your container. When in doubt, use a larger type rather than a smaller type.
Use care when converting integer types. Integer conversions and promotions can cause non-intuitive behavior.
Über vorzeichenlose Ganzzahlen
Some people, including some textbook authors, recommend using unsigned types to represent numbers that are never negative. This is intended as a form of self-documentation. However, in C, the advantages of such documentation are outweighed by the real bugs it can introduce. Consider:
for (unsigned int i = foo.Length()-1; i >= 0; --i) ...
This code will never terminate! Sometimes gcc will notice this bug and warn you, but often it will not. Equally bad bugs can occur when comparing signed and unsigned variables. Basically, C's type-promotion scheme causes unsigned types to behave differently than one might expect.
So, document that a variable is non-negative using assertions. Don't use an unsigned type.
64-bit Portabilität
Code should be 64-bit and 32-bit friendly. Bear in mind problems of printing, comparisons, and structure alignment.
Dein Programm sollte sowohl unter 64-Bit als auch unter 32-Bit laufen. Behalte im Hinterkopf die Probleme vom Drucken über Wertvergleiche bis zur Speicherausrichtung von Datenstrukturen.
-
printf()
specifiers for some types are not cleanly portable between 32-bit and 64-bit systems. C99 defines some portable format specifiers. Unfortunately, MSVC 7.1 does not understand some of these specifiers and the standard is missing a few, so we have to define our own ugly versions in some cases (in the style of the standard include fileinttypes.h
):// printf macros for size_t, in the style of inttypes.h #ifdef _LP64 #define __PRIS_PREFIX "z" #else #define __PRIS_PREFIX #endif // Use these macros after a % in a printf format string // to get correct 32/64 bit behavior, like this: // size_t size = records.size(); // printf("%" PRIuS "\n", size); #define PRIdS __PRIS_PREFIX "d" #define PRIxS __PRIS_PREFIX "x" #define PRIuS __PRIS_PREFIX "u" #define PRIXS __PRIS_PREFIX "X" #define PRIoS __PRIS_PREFIX "o"
Type DO NOT use DO use Notes void *
(or any pointer)%lx
%p
int64_t
%qd
,%lld
%" PRId64 "
uint64_t
%qu
,%llu
,%llx
%" PRIu64 "
,%" PRIx64 "
size_t
%u
%" PRIuS "
,%" PRIxS "
C99 specifies %zu
ptrdiff_t
%d
%" PRIdS "
C99 specifies %td
Note that the
PRI*
macros expand to independent strings which are concatenated by the compiler. Hence if you are using a non-constant format string, you need to insert the value of the macro into the format, rather than the name. Note also that spaces are required around the macro identifier to separate it from the string literal. It is still possible, as usual, to include length specifiers, etc., after the%
when using thePRI*
macros. So, e.g.printf("x = %30" PRIuS "\n", x)
would expand on 32-bit Linux toprintf("x = %30" "u" "\n", x)
, which the compiler will treat asprintf("x = %30u\n", x)
. - Remember that
sizeof(void *)
!=sizeof(int)
. Useintptr_t
if you want a pointer-sized integer. - You may need to be careful with structure
alignments, particularly for structures being stored on
disk. Any class/structure with a
int64_t
/uint64_t
member will by default end up being 8-byte aligned on a 64-bit system. If you have such structures being shared on disk between 32-bit and 64-bit code, you will need to ensure that they are packed the same on both architectures. Most compilers offer a way to alter structure alignment. For gcc, you can use__attribute__((packed))
. MSVC offers#pragma pack()
and__declspec(align())
. -
Use the
LL
orULL
suffixes as needed to create 64-bit constants. For example:int64_t my_value = 0x123456789LL; uint64_t my_mask = 3ULL << 48;
Makros des Präprozessors
Avoid defining macros, especially in headers; prefer
inline functions, enums, and const
variables.
Name macros with a project-specific prefix. Do not use
macros to define pieces of a C++ API.
Anstelle von Makros, speziell in Headern definiert,
schreib lieber inline-Funktionen, enums und
const
Variablen.
Deine Makros sollten einen projektspezifischen Präfix im
Namen tragen. Keine Makros um eine Programmierschnittstelle
(API) zu definieren.
Macros mean that the code you see is not the same as the code the compiler sees. This can introduce unexpected behavior, especially since macros have global scope.
The problems introduced by macros are especially severe when they are used to define pieces of a C++ API, and still more so for public APIs. Every error message from the compiler when developers incorrectly use that interface now must explain how the macros formed the interface. Refactoring and analysis tools have a dramatically harder time updating the interface. As a consequence, we specifically disallow using macros in this way. For example, avoid patterns like:
class WOMBAT_TYPE(Foo) { // ... public: EXPAND_PUBLIC_WOMBAT_API(Foo) EXPAND_WOMBAT_COMPARISONS(Foo, ==, <) };
Luckily, macros are not nearly as necessary in C++ as
they are in C. Instead of using a macro to inline
performance-critical code, use an inline function.
Instead of using a macro to store a constant, use a
const
variable. Instead of using a macro to
"abbreviate" a long variable name, use a reference.
Instead of using a macro to conditionally compile code
... well, don't do that at all (except, of course, for
the #define
guards to prevent double
inclusion of header files). It makes testing much more
difficult.
Macros can do things these other techniques cannot, and you do see them in the codebase, especially in the lower-level libraries. And some of their special features (like stringifying, concatenation, and so forth) are not available through the language proper. But before using a macro, consider carefully whether there's a non-macro way to achieve the same result. If you need to use a macro to define an interface, contact your project leads to request a waiver of this rule.
The following usage pattern will avoid many problems with macros; if you use macros, follow it whenever possible:
- Don't define macros in a
.h
file. #define
macros right before you use them, and#undef
them right after.- Do not just
#undef
an existing macro before replacing it with your own; instead, pick a name that's likely to be unique. - Try not to use macros that expand to unbalanced C++ constructs, or at least document that behavior well.
- Prefer not using
##
to generate function/class/variable names.
Exporting macros from headers (i.e. defining them in a header
without #undef
ing them before the end of the header)
is extremely strongly discouraged. If you do export a macro from a
header, it must have a globally unique name. To achieve this, it
must be named with a prefix consisting of your project's namespace
name (but upper case).
0 und nullptr/NULL
Use 0
for integers, 0.0
for
reals, nullptr
(or NULL
) for
pointers, and '\0'
for chars.
Schreibe 0
für Ganzzahltypen, 0.0
für
Fliesskommazahlen, nullptr
(oder NULL
) für
Zeiger, und '\0'
für Textzeichen.
Use 0
for integers and 0.0
for reals. This is not controversial.
Schreibe 0
für Ganzzahltypen, 0.0
für
Fliesskommazahlen. Das ist nicht widersinnig.
For
pointers (address values), there is a choice between
0
, NULL
, and
nullptr
. For projects that allow C++11
features, use nullptr
. For C++03 projects,
we prefer NULL
because it looks like a
pointer. In fact, some C++ compilers provide special
definitions of NULL
which enable them to
give useful warnings, particularly in situations where
sizeof(NULL)
is not equal to
sizeof(0)
.
Use '\0'
for chars. This is the correct
type and also makes code more readable.
sizeof
Prefer sizeof(varname)
to
sizeof(type)
.
Schreibe besser sizeof(varname)
als
sizeof(type)
.
Use sizeof(varname)
when you
take the size of a particular variable.
sizeof(varname)
will update
appropriately if someone changes the variable type either
now or later. You may use
sizeof(type)
for code unrelated
to any particular variable, such as code that manages an
external or internal data format where a variable of an
appropriate C++ type is not convenient.
Struct data; memset(&data, 0, sizeof(data));
memset(&data, 0, sizeof(Struct));
if (raw_size < sizeof(int)) { LOG(ERROR) << "compressed record not big enough for count: " << raw_size; return false; }
auto
Use auto
to avoid type names that are noisy, obvious,
or unimportant - cases where the type doesn't aid in clarity for the
reader. Continue to use manifest type declarations when it helps
readability.
Benutze auto
um Variablennamen auszublenden, die
völlig klar oder überflüssig sind für das Verständnis deines Codes.
Benutze weiterhin starke Namen wenn es der Lesbarkeit dienlich erscheint.
- C++ type names can be long and cumbersome, especially when they involve templates or namespaces.
- When a C++ type name is repeated within a single declaration or a small code region, the repetition may not be aiding readability.
- It is sometimes safer to let the type be specified by the type of the initialization expression, since that avoids the possibility of unintended copies or type conversions.
Sometimes code is clearer when types are manifest, especially when a variable's initialization depends on things that were declared far away. In expressions like:
auto foo = x.add_foo(); auto i = y.Find(key);
it may not be obvious what the resulting types are if the type
of y
isn't very well known, or if y
was
declared many lines earlier.
Programmers have to understand the difference between
auto
and const auto&
or
they'll get copies when they didn't mean to.
If an auto
variable is used as part of an
interface, e.g. as a constant in a header, then a
programmer might change its type while only intending to
change its value, leading to a more radical API change
than intended.
auto
is permitted when it increases readability,
particularly as described below. Never initialize an auto
-typed
variable with a braced initializer list.
Specific cases where auto
is allowed or encouraged:
- (Encouraged) For iterators and other long/cluttery type names, particularly
when the type is clear from context (calls
to
find
,begin
, orend
for instance). - (Allowed) When the type is clear from local context (in the same expression
or within a few lines). Initialization of a pointer or smart pointer
with calls
to
new
commonly falls into this category, as does use ofauto
in a range-based loop over a container whose type is spelled out nearby. - (Allowed) When the type doesn't matter because it isn't being used for anything other than equality comparison.
- (Encouraged) When iterating over a map with a range-based loop
(because it is often assumed that the correct type
is
std::pair<KeyType, ValueType>
whereas it is actuallystd::pair<const KeyType, ValueType>
). This is particularly well paired with localkey
andvalue
aliases for.first
and.second
(often const-ref).for (const auto& item : some_map) { const KeyType& key = item.first; const ValType& value = item.second; // The rest of the loop can now just refer to key and value, // a reader can see the types in question, and we've avoided // the too-common case of extra copies in this iteration. }
Geschwungene Initialisierungsliste
You may use braced initializer lists.
Du darfst Initialisierungslisten mit geschwungenen Klammern benutzen.
In C++03, aggregate types (arrays and structs with no constructor) could be initialized with braced initializer lists.
struct Point { int x; int y; }; Point p = {1, 2};
In C++11, this syntax was generalized, and any object type can now be created with a braced initializer list, known as a braced-init-list in the C++ grammar. Here are a few examples of its use.
// Vector takes a braced-init-list of elements. std::vector<string> v{"foo", "bar"}; // Basically the same, ignoring some small technicalities. // You may choose to use either form. std::vector<string> v = {"foo", "bar"}; // Usable with 'new' expressions. auto p = new vector<string>{"foo", "bar"}; // A map can take a list of pairs. Nested braced-init-lists work. std::map<int, string> m = {{1, "one"}, {2, "2"}}; // A braced-init-list can be implicitly converted to a return type. std::vector<int> test_function() { return {1, 2, 3}; } // Iterate over a braced-init-list. for (int i : {-1, -2, -3}) {} // Call a function using a braced-init-list. void TestFunction2(std::vector<int> v) {} TestFunction2({1, 2, 3});
A user-defined type can also define a constructor and/or assignment operator
that take std::initializer_list<T>
, which is automatically
created from braced-init-list:
class MyType { public: // std::initializer_list references the underlying init list. // It should be passed by value. MyType(std::initializer_list<int> init_list) { for (int i : init_list) append(i); } MyType& operator=(std::initializer_list<int> init_list) { clear(); for (int i : init_list) append(i); } }; MyType m{2, 3, 5, 7};
Finally, brace initialization can also call ordinary
constructors of data types, even if they do not have
std::initializer_list<T>
constructors.
double d{1.23}; // Calls ordinary constructor as long as MyOtherType has no // std::initializer_list constructor. class MyOtherType { public: explicit MyOtherType(string); MyOtherType(int, string); }; MyOtherType m = {1, "b"}; // If the constructor is explicit, you can't use the "= {}" form. MyOtherType m{"b"};
Never assign a braced-init-list to an auto local variable. In the single element case, what this means can be confusing.
auto d = {1.23}; // d is a std::initializer_list<double>
auto d = double{1.23}; // Good -- d is a double, not a std::initializer_list.
See Braced_Initializer_List_Format for formatting.
Lambda-Ausdrücke
Use lambda expressions where appropriate. Prefer explicit captures when the lambda will escape the current scope.
Verwende Lambda-Ausdrücke wo angebracht. Bevorzuge ausdrückliche captures, wenn die Lambda den gegenwärtigen Gültigkeitsbereich verlässt.
Lambda expressions are a concise way of creating anonymous function objects. They're often useful when passing functions as arguments. For example:
std::sort(v.begin(), v.end(), [](int x, int y) { return Weight(x) < Weight(y); });
They further allow capturing variables from the enclosing scope either explicitly by name, or implicitly using a default capture. Explicit captures require each variable to be listed, as either a value or reference capture:
int weight = 3; int sum = 0; // Captures `weight` by value and `sum` by reference. std::for_each(v.begin(), v.end(), [weight, &sum](int x) { sum += weight * x; });Default captures implicitly capture any variable referenced in the lambda body, including
this
if any members are used:
const std::vector<int> lookup_table = ...; std::vector<int> indices = ...; // Captures `lookup_table` by reference, sorts `indices` by the value // of the associated element in `lookup_table`. std::sort(indices.begin(), indices.end(), [&](int a, int b) { return lookup_table[a] < lookup_table[b]; });
Lambdas were introduced in C++11 along with a set of utilities
for working with function objects, such as the polymorphic
wrapper std::function
.
- Lambdas are much more concise than other ways of defining function objects to be passed to STL algorithms, which can be a readability improvement.
- Appropriate use of default captures can remove redundancy and highlight important exceptions from the default.
- Lambdas,
std::function
, andstd::bind
can be used in combination as a general purpose callback mechanism; they make it easy to write functions that take bound functions as arguments.
- Variable capture in lambdas can be a source of dangling-pointer bugs, particularly if a lambda escapes the current scope.
- Default captures by value can be misleading because they do not prevent dangling-pointer bugs. Capturing a pointer by value doesn't cause a deep copy, so it often has the same lifetime issues as capture by reference. This is especially confusing when capturing 'this' by value, since the use of 'this' is often implicit.
- It's possible for use of lambdas to get out of hand; very long nested anonymous functions can make code harder to understand.
- Use lambda expressions where appropriate, with formatting as described below.
- Prefer explicit captures if the lambda may escape the current scope.
For example, instead of:
{ Foo foo; ... executor->Schedule([&] { Frobnicate(foo); }) ... } // BAD! The fact that the lambda makes use of a reference to `foo` and // possibly `this` (if `Frobnicate` is a member function) may not be // apparent on a cursory inspection. If the lambda is invoked after // the function returns, that would be bad, because both `foo` // and the enclosing object could have been destroyed.
prefer to write:{ Foo foo; ... executor->Schedule([&foo] { Frobnicate(foo); }) ... } // BETTER - The compile will fail if `Frobnicate` is a member // function, and it's clearer that `foo` is dangerously captured by // reference.
- Use default capture by reference ([&]) only when the lifetime of the lambda is obviously shorter than any potential captures.
- Use default capture by value ([=]) only as a means of binding a few variables for a short lambda, where the set of captured variables is obvious at a glance. Prefer not to write long or complex lambdas with default capture by value.
- Keep unnamed lambdas short. If a lambda body is more than maybe five lines long, prefer to give the lambda a name, or to use a named function instead of a lambda.
- Specify the return type of the lambda explicitly if that will
make it more obvious to readers, as with
auto
.
Metaprogrammierung mittels Vorlagen
Avoid complicated template programming.
Gehe komplizierter Vorlagenprogrammierung aus dem Weg.
Template metaprogramming refers to a family of techniques that exploit the fact that the C++ template instantiation mechanism is Turing complete and can be used to perform arbitrary compile-time computation in the type domain.
Template metaprogramming allows extremely flexible interfaces that
are type safe and high performance. Facilities like
Google Test,
std::tuple
, std::function
, and
Boost.Spirit would be impossible without it.
The techniques used in template metaprogramming are often obscure to anyone but language experts. Code that uses templates in complicated ways is often unreadable, and is hard to debug or maintain.
Template metaprogramming often leads to extremely poor compiler time error messages: even if an interface is simple, the complicated implementation details become visible when the user does something wrong.
Template metaprogramming interferes with large scale refactoring by making the job of refactoring tools harder. First, the template code is expanded in multiple contexts, and it's hard to verify that the transformation makes sense in all of them. Second, some refactoring tools work with an AST that only represents the structure of the code after template expansion. It can be difficult to automatically work back to the original source construct that needs to be rewritten.
Template metaprogramming sometimes allows cleaner and easier-to-use interfaces than would be possible without it, but it's also often a temptation to be overly clever. It's best used in a small number of low level components where the extra maintenance burden is spread out over a large number of uses.
Think twice before using template metaprogramming or other
complicated template techniques; think about whether the average
member of your team will be able to understand your code well enough
to maintain it after you switch to another project, or whether a
non-C++ programmer or someone casually browsing the code base will be
able to understand the error messages or trace the flow of a function
they want to call. If you're using recursive template instantiations
or type lists or metafunctions or expression templates, or relying on
SFINAE or on the sizeof
trick for detecting function
overload resolution, then there's a good chance you've gone too
far.
If you use template metaprogramming, you should expect to put considerable effort into minimizing and isolating the complexity. You should hide metaprogramming as an implementation detail whenever possible, so that user-facing headers are readable, and you should make sure that tricky code is especially well commented. You should carefully document how the code is used, and you should say something about what the "generated" code looks like. Pay extra attention to the error messages that the compiler emits when users make mistakes. The error messages are part of your user interface, and your code should be tweaked as necessary so that the error messages are understandable and actionable from a user point of view.
Boost
Use only approved libraries from the Boost library collection.
Benutze nur anerkannte Bibliotheken aus der Boost Bibliothekenkollektion.
The Boost library collection is a popular collection of peer-reviewed, free, open-source C++ libraries.
Boost code is generally very high-quality, is widely portable, and fills many important gaps in the C++ standard library, such as type traits and better binders.
Some Boost libraries encourage coding practices which can hamper readability, such as metaprogramming and other advanced template techniques, and an excessively "functional" style of programming.
In order to maintain a high level of readability for all contributors who might read and maintain code, we only allow an approved subset of Boost features. Currently, the following libraries are permitted:
-
Call Traits from
boost/call_traits.hpp
-
Compressed Pair from
boost/compressed_pair.hpp
-
The Boost Graph Library (BGL) from
boost/graph
, except serialization (adj_list_serialize.hpp
) and parallel/distributed algorithms and data structures (boost/graph/parallel/*
andboost/graph/distributed/*
). -
Property Map from
boost/property_map
, except parallel/distributed property maps (boost/property_map/parallel/*
). -
Iterator from
boost/iterator
- The part of
Polygon that deals with Voronoi diagram
construction and doesn't depend on the rest of
Polygon:
boost/polygon/voronoi_builder.hpp
,boost/polygon/voronoi_diagram.hpp
, andboost/polygon/voronoi_geometry_type.hpp
-
Bimap from
boost/bimap
-
Statistical Distributions and Functions from
boost/math/distributions
-
Special Functions from
boost/math/special_functions
-
Multi-index from
boost/multi_index
-
Heap from
boost/heap
- The flat containers from
Container:
boost/container/flat_map
, andboost/container/flat_set
- Intrusive
from
boost/intrusive
. - The
boost/sort
library. - Preprocessor
from
boost/preprocessor
.
We are actively considering adding other Boost features to the list, so this list may be expanded in the future.
The following libraries are permitted, but their use is discouraged because they've been superseded by standard libraries in C++11:
-
Array from
boost/array.hpp
: usestd::array
instead. -
Pointer Container from
boost/ptr_container
: use containers ofstd::unique_ptr
instead.
std::hash
Do not define specializations of std::hash
.
Implementiere keine Spezialisierung von std::hash
.
std::hash<T>
is the function object that the
C++11 hash containers use to hash keys of type T
,
unless the user explicitly specifies a different hash function. For
example, std::unordered_map<int, string>
is a hash
map that uses std::hash<int>
to hash its keys,
whereas std::unordered_map<int, string, MyIntHash>
uses MyIntHash
.
std::hash
is defined for all integral, floating-point,
pointer, and enum
types, as well as some standard library
types such as string
and unique_ptr
. Users
can enable it to work for their own types by defining specializations
of it for those types.
std::hash
is easy to use, and simplifies the code
since you don't have to name it explicitly. Specializing
std::hash
is the standard way of specifying how to
hash a type, so it's what outside resources will teach, and what
new engineers will expect.
std::hash
is hard to specialize. It requires a lot
of boilerplate code, and more importantly, it combines responsibility
for identifying the hash inputs with responsibility for executing the
hashing algorithm itself. The type author has to be responsible for
the former, but the latter requires expertise that a type author
usually doesn't have, and shouldn't need. The stakes here are high
because low-quality hash functions can be security vulnerabilities,
due to the emergence of
hash flooding attacks.
Even for experts, std::hash
specializations are
inordinately difficult to implement correctly for compound types,
because the implementation cannot recursively call std::hash
on data members. High-quality hash algorithms maintain large
amounts of internal state, and reducing that state to the
size_t
bytes that std::hash
returns is usually the slowest part of the computation, so it
should not be done more than once.
Due to exactly that issue, std::hash
does not work
with std::pair
or std::tuple
, and the
language does not allow us to extend it to support them.
You can use std::hash
with the types that it supports
"out of the box", but do not specialize it to support additional types.
If you need a hash table with a key type that std::hash
does not support, consider using legacy hash containers (e.g.
hash_map
) for now; they use a different default hasher,
which is unaffected by this prohibition.
If you want to use the standard hash containers anyway, you will need to specify a custom hasher for the key type, e.g.
std::unordered_map<MyKeyType, Value, MyKeyTypeHasher> my_map;
Consult with the type's owners to see if there is an existing hasher that you can use; otherwise work with them to provide one, or roll your own.
We are planning to provide a hash function that can work with any type,
using a new customization mechanism that doesn't have the drawbacks of
std::hash
.
C++11
Use libraries and language extensions from C++11 when appropriate. Consider portability to other environments before using C++11 features in your project.
Benutze die Bibliotheken und Spracherweiterungen von C++11 wenn möglich. Beachte aber die Kompatibilität mit Anderen vor dem Einbringen von C++11 Eigenheiten im Projekt.
C++11 contains significant changes both to the language and libraries.
C++11 was the official standard until august 2014, and is supported by most C++ compilers. It standardizes some common C++ extensions that we use already, allows shorthands for some operations, and has some performance and safety improvements.
The C++11 standard is substantially more complex than its predecessor (1,300 pages versus 800 pages), and is unfamiliar to many developers. The long-term effects of some features on code readability and maintenance are unknown. We cannot predict when its various features will be implemented uniformly by tools that may be of interest, particularly in the case of projects that are forced to use older versions of tools.
As with Boost, some C++11 extensions encourage coding practices that hamper readability—for example by removing checked redundancy (such as type names) that may be helpful to readers, or by encouraging template metaprogramming. Other extensions duplicate functionality available through existing mechanisms, which may lead to confusion and conversion costs.
C++11 features may be used unless specified otherwise. In addition to what's described in the rest of the style guide, the following C++11 features may not be used:
- Compile-time rational numbers
(
<ratio>
), because of concerns that it's tied to a more template-heavy interface style. - The
<cfenv>
and<fenv.h>
headers, because many compilers do not support those features reliably. - Ref-qualifiers on member functions, such as
void X::Foo() &
orvoid X::Foo() &&
, because of concerns that they're an overly obscure feature.
Nicht-Standard Erweiterungen
Nonstandard extensions to C++ may not be used unless otherwise specified.
Nicht-Standard-Erweiterungen von C++ dürfen nicht benutzt werden, ausser wirklich spezifiert.
Compilers support various extensions that are not part of standard C++. Such
extensions include GCC's __attribute__
, intrinsic functions such
as __builtin_prefetch
, designated initializers (e.g.
Foo f = {.field = 3}
), inline assembly, __COUNTER__
,
__PRETTY_FUNCTION__
, compound statement expressions (e.g.
foo = ({ int x; Bar(&x); x })
, variable-length arrays and
alloca()
, and the a?:b
syntax.
- Nonstandard extensions may provide useful features that do not exist in standard C++. For example, some people think that designated initializers are more readable than standard C++ features like constructors.
- Important performance guidance to the compiler can only be specified using extensions.
- Nonstandard extensions do not work in all compilers. Use of nonstandard extensions reduces portability of code.
- Even if they are supported in all targeted compilers, the extensions are often not well-specified, and there may be subtle behavior differences between compilers.
- Nonstandard extensions add to the language features that a reader must know to understand the code.
Do not use nonstandard extensions. You may use portability wrappers that are implemented using nonstandard extensions, so long as those wrappers are provided by a designated project-wide portability header.
Zweitbezeichnung
Public aliases are for the benefit of an API's user, and should be clearly documented.
Öffentliche Zweitbezeichnungen, wenn ausführlich dokumentiert, sind für den Benutzer der Programmierschnittstelle (API) nützlich.
There are several ways to create names that are aliases of other entities:
typedef Foo Bar; using Bar = Foo; using other_namespace::Foo;
Like other declarations, aliases declared in a header file are part of that header's public API unless they're in a function definition, in the private portion of a class, or in an explicitly-marked internal namespace. Aliases in such areas or in .cc files are implementation details (because client code can't refer to them), and are not restricted by this rule.
- Aliases can improve readability by simplifying a long or complicated name.
- Aliases can reduce duplication by naming in one place a type used repeatedly in an API, which might make it easier to change the type later.
- When placed in a header where client code can refer to them, aliases increase the number of entities in that header's API, increasing its complexity.
- Clients can easily rely on unintended details of public aliases, making changes difficult.
- It can be tempting to create a public alias that is only intended for use in the implementation, without considering its impact on the API, or on maintainability.
- Aliases can create risk of name collisions
- Aliases can reduce readability by giving a familiar construct an unfamiliar name
- Type aliases can create an unclear API contract: it is unclear whether the alias is guaranteed to be identical to the type it aliases, to have the same API, or only to be usable in specified narrow ways
Don't put an alias in your public API just to save typing in the implementation; do so only if you intend it to be used by your clients.
When defining a public alias, document the intent of the new name, including whether it is guaranteed to always be the same as the type it's currently aliased to, or whether a more limited compatibility is intended. This lets the user know whether they can treat the types as substitutable or whether more specific rules must be followed, and can help the implementation retain some degree of freedom to change the alias.
Don't put namespace aliases in your public API. (See also Namespaces).
For example, these aliases document how they are intended to be used in client code:
namespace a { // Used to store field measurements. DataPoint may change from Bar* to some internal type. // Client code should treat it as an opaque pointer. using DataPoint = foo::bar::Bar*; // A set of measurements. Just an alias for user convenience. using TimeSeries = std::unordered_set<DataPoint, std::hash<DataPoint>, DataPointComparator>; } // namespace a
These aliases don't document intended use, and half of them aren't meant for client use:
namespace a { // Bad: none of these say how they should be used. using DataPoint = foo::bar::Bar*; using std::unordered_set; // Bad: just for local convenience using std::hash; // Bad: just for local convenience typedef unordered_set<DataPoint, hash<DataPoint>, DataPointComparator> TimeSeries; } // namespace a
However, local convenience aliases are fine in function definitions, private sections of classes, explicitly marked internal namespaces, and in .cc files:
// In a .cc file using std::unordered_set;
Namensgebung
The most important consistency rules are those that govern naming. The style of a name immediately informs us what sort of thing the named entity is: a type, a variable, a function, a constant, a macro, etc., without requiring us to search for the declaration of that entity. The pattern-matching engine in our brains relies a great deal on these naming rules.
Naming rules are pretty arbitrary, but we feel that consistency is more important than individual preferences in this area, so regardless of whether you find them sensible or not, the rules are the rules.
Generelle Namensregeln
Names should be descriptive; avoid abbreviation.
Namen sollten deutlich beschreibend sein; versuche nicht, Abkürzungen einzuführen.
Give as descriptive a name as possible, within reason. Do not worry about saving horizontal space as it is far more important to make your code immediately understandable by a new reader. Do not use abbreviations that are ambiguous or unfamiliar to readers outside your project, and do not abbreviate by deleting letters within a word.
int price_count_reader; // No abbreviation. int num_errors; // "num" is a widespread convention. int num_dns_connections; // Most people know what "DNS" stands for.
int n; // Meaningless. int nerr; // Ambiguous abbreviation. int n_comp_conns; // Ambiguous abbreviation. int wgc_connections; // Only your group knows what this stands for. int pc_reader; // Lots of things can be abbreviated "pc". int cstmr_id; // Deletes internal letters.
Note that certain universally-known abbreviations are OK, such as
i
for an iteration variable and T
for a
template parameter.
Template parameters should follow the naming style for their category: type template parameters should follow the rules for type names, and non-type template parameters should follow the rules for variable names.
Dateinamen
Filenames should be all lowercase and can include
underscores (_
) or dashes (-
).
Follow the convention that your
project uses. If there is no consistent
local pattern to follow, prefer "_".
Dateinamen sollten in Kleinbuchstaben geschrieben sein
und können Unterstriche (_
) oder Trennzeichen (-
)
enthalten.
Folge der Projektkonvention, oder
bevorzuge "_".
Examples of acceptable file names:
my_useful_class.cc
my-useful-class.cc
myusefulclass.cc
myusefulclass_test.cc // _unittest and _regtest are deprecated.
C++ files should end in .cc
and header files should end in
.h
. Files that rely on being textually included at specific points
should end in .inc
(see also the section on
self-contained headers).
Do not use filenames that already exist in
/usr/include
, such as db.h
.
In general, make your filenames very specific. For
example, use http_server_logs.h
rather than
logs.h
. A very common case is to have a pair
of files called, e.g., foo_bar.h
and
foo_bar.cc
, defining a class called
FooBar
.
Inline functions must be in a .h
file. If
your inline functions are very short, they should go
directly into your .h
file.
Typnamen
Type names start with a capital letter and have a capital
letter for each new word, with no underscores:
MyExcitingClass
, MyExcitingEnum
.
Typnamen starten mit einem Grossbuchstaben und
für jedes Teilwort (camel case), ohne Unterstriche dazwischen:
MyExcitingClass
, MyExcitingEnum
.
The names of all types — classes, structs, type aliases, enums, and type template parameters — have the same naming convention. Type names should start with a capital letter and have a capital letter for each new word. No underscores. For example:
// classes and structs class UrlTable { ... class UrlTableTester { ... struct UrlTableProperties { ... // typedefs typedef hash_map<UrlTableProperties *, string> PropertiesMap; // using aliases using PropertiesMap = hash_map<UrlTableProperties *, string>; // enums enum UrlTableErrors { ...
Variablennamen
The names of variables (including function parameters) and data members are
all lowercase, with underscores between words. Data members of classes (but not
structs) additionally have trailing underscores. For instance:
a_local_variable
, a_struct_data_member
,
a_class_data_member_
.
Namen von Variablen, und auch von Funktionsparametern und Data-Member,
sind alle in Kleinbuchstaben geschrieben mit Unterstrichen zwischen Teilwörtern.
Data-Member von Klassen, aber nicht von Strukturen, sind mit einem Unterstrich am Ende
des Namens bezeichnet.
Beispiele:
a_local_variable
, a_struct_data_member
,
a_class_data_member_
.
Gemeine Variablennamen
For example:
string table_name; // OK - uses underscore. string tablename; // OK - all lowercase.
string tableName; // Bad - mixed case.
Klassen-Daten-Member
Data members of classes, both static and non-static, are named like ordinary nonmember variables, but with a trailing underscore.
class TableInfo { ... private: string table_name_; // OK - underscore at end. string tablename_; // OK. static Pool<TableInfo>* pool_; // OK. };
Strukturen-Daten-Member
Data members of structs, both static and non-static, are named like ordinary nonmember variables. They do not have the trailing underscores that data members in classes have.
struct UrlTableProperties { string name; int num_entries; static Pool<UrlTableProperties>* pool; };
See Structs vs. Classes for a discussion of when to use a struct versus a class.
Konstantennamen
Variables declared constexpr or const, and whose value is fixed for the duration of the program, are named with a leading "k" followed by mixed case. For example:
Variablen deklariert als constexpr
oder const
sind Konstanten für die Dauer der Ausführung des Programmes und bezeichnet
mit einem vorangestellten "k" gefolgt von gemischter Gross-/Kleinschreibung.
Beispiel:
const int kDaysInAWeek = 7;
All such variables with static storage duration (i.e. statics and globals, see Storage Duration for details) should be named this way. This convention is optional for variables of other storage classes, e.g. automatic variables, otherwise the usual variable naming rules apply.
Funktionennamen
Regular functions have mixed case; accessors and mutators may be named like variables.
Gewöhnliche Funktionen werden in gemischter Gross-/Kleinschreibung geschrieben. Zugriffsfunktionen (getters, setters) können wie Variablen geschrieben werden.
Ordinarily, functions should start with a capital letter and have a
capital letter for each new word
(a.k.a. "Camel
Case" or "Pascal case"). Such names should not have
underscores. Prefer to capitalize acronyms as single words
(i.e. StartRpc()
, not StartRPC()
).
AddTableEntry() DeleteUrl() OpenFileOrDie()
(The same naming rule applies to class- and namespace-scope constants that are exposed as part of an API and that are intended to look like functions, because the fact that they're objects rather than functions is an unimportant implementation detail.)
Accessors and mutators (get and set functions) may be named like
variables. These often correspond to actual member variables, but this is
not required. For example, int count()
and void
set_count(int count)
.
Namen von Namensräumen
Namespace names are all lower-case. Top-level namespace names are based on the project name . Avoid collisions between nested namespaces and well-known top-level namespaces.
Namen von Namensräumen sind in Kleinbuchstaben zu schreiben. Hauptnamensräume sind nach dem Projektnamen zu bezeichnen. Gehe Namenskollisionen mit bekannten Namensräumen aus dem Weg.
The name of a top-level namespace should usually be the name of the project or team whose code is contained in that namespace. The code in that namespace should usually be in a directory whose basename matches the namespace name (or subdirectories thereof).
Keep in mind that the rule against abbreviated names applies to namespaces just as much as variable names. Code inside the namespace seldom needs to mention the namespace name, so there's usually no particular need for abbreviation anyway.
Avoid nested namespaces that match well-known top-level
namespaces. Collisions between namespace names can lead to surprising
build breaks because of name lookup rules. In particular, do not
create any nested std
namespaces. Prefer unique project
identifiers
(websearch::index
, websearch::index_util
)
over collision-prone names like websearch::util
.
For internal
namespaces, be wary of other code being
added to the same internal
namespace causing a collision
(internal helpers within a team tend to be related and may lead to
collisions). In such a situation, using the filename to make a unique
internal name is helpful
(websearch::index::frobber_internal
for use
in frobber.h
)
Namen von Aufzähltypen
Enumerators (for both scoped and unscoped enums) should be named either like
constants or like
macros: either kEnumName
or
ENUM_NAME
.
Aufzählungen (scoped und unscoped) sollten bezeichnet werde wie
Konstanten oder wie
Makros: also wie kEnumName
oder
ENUM_NAME
.
Preferably, the individual enumerators should be named
like constants. However, it
is also acceptable to name them like
macros. The enumeration name,
UrlTableErrors
(and
AlternateUrlTableErrors
), is a type, and
therefore mixed case.
enum UrlTableErrors { kOK = 0, kErrorOutOfMemory, kErrorMalformedInput, }; enum AlternateUrlTableErrors { OK = 0, OUT_OF_MEMORY = 1, MALFORMED_INPUT = 2, };
Until January 2009, the style was to name enum values like macros. This caused problems with name collisions between enum values and macros. Hence, the change to prefer constant-style naming was put in place. New code should prefer constant-style naming if possible. However, there is no reason to change old code to use constant-style names, unless the old names are actually causing a compile-time problem.
Makronamen
You're not really going to
define a macro, are you? If you do, they're like this:
MY_MACRO_THAT_SCARES_SMALL_CHILDREN
.
Du willst nicht wirklich ein
Makro definieren, gell? Falls doch, die schauen so aus:
MY_MACRO_THAT_SCARES_SMALL_CHILDREN
.
Please see the description of macros; in general macros should not be used. However, if they are absolutely needed, then they should be named with all capitals and underscores.
#define ROUND(x) ... #define PI_ROUNDED 3.0
Ausnahmen zu den Namensregeln
If you are naming something that is analogous to an existing C or C++ entity then you can follow the existing naming convention scheme.
Wenn du etwas benennen musst, das ähnlich ist, wie ein bestehendes C oder C++ Ding, dann folge deren Konvention.
bigopen()
- function name, follows form of
open()
uint
typedef
bigpos
struct
orclass
, follows form ofpos
sparse_hash_map
- STL-like entity; follows STL naming conventions
LONGLONG_MAX
- a constant, as in
INT_MAX
Kommentare
Though a pain to write, comments are absolutely vital to keeping our code readable. The following rules describe what you should comment and where. But remember: while comments are very important, the best code is self-documenting. Giving sensible names to types and variables is much better than using obscure names that you must then explain through comments.
When writing your comments, write for your audience: the next contributor who will need to understand your code. Be generous — the next one may be you!
Kommentarstil
Use either the //
or /* */
syntax, as long as you are consistent.
Benutze entweder //
oder /* */
.
You can use either the //
or the /*
*/
syntax; however, //
is
much more common. Be consistent with how you
comment and what style you use where.
Dateikommentare
Start each file with license boilerplate.
Beginne jede Datei mit einem Schwall an Lizenztext.
File comments describe the contents of a file. If a file declares, implements, or tests exactly one abstraction that is documented by a comment at the point of declaration, file comments are not required. All other files must have file comments.
Rechtliche Hinweise und Autorenbezeichnung
Every file should contain license boilerplate. Choose the appropriate boilerplate for the license used by the project (for example, Apache 2.0, BSD, LGPL, GPL).
If you make significant changes to a file with an author line, consider deleting the author line.
Dateiinhalt
If a .h
declares multiple abstractions, the file-level comment
should broadly describe the contents of the file, and how the abstractions are
related. A 1 or 2 sentence file-level comment may be sufficient. The detailed
documentation about individual abstractions belongs with those abstractions,
not at the file level.
Do not duplicate comments in both the .h
and the
.cc
. Duplicated comments diverge.
Klassenkommentare
Every non-obvious class declaration should have an accompanying comment that describes what it is for and how it should be used.
Jede nicht banale Klassendeklaration sollte von einem Kommentar begleitet sein, der aufzeigt, für was sie ist und wie man sie einsetzen kann.
// Iterates over the contents of a GargantuanTable. // Example: // GargantuanTableIterator* iter = table->NewIterator(); // for (iter->Seek("foo"); !iter->done(); iter->Next()) { // process(iter->key(), iter->value()); // } // delete iter; class GargantuanTableIterator { ... };
The class comment should provide the reader with enough information to know how and when to use the class, as well as any additional considerations necessary to correctly use the class. Document the synchronization assumptions the class makes, if any. If an instance of the class can be accessed by multiple threads, take extra care to document the rules and invariants surrounding multithreaded use.
The class comment is often a good place for a small example code snippet demonstrating a simple and focused usage of the class.
When sufficiently separated (e.g. .h
and .cc
files), comments describing the use of the class should go together with its
interface definition; comments about the class operation and implementation
should accompany the implementation of the class's methods.
Funktionenkommentare
Declaration comments describe use of the function (when it is non-obvious); comments at the definition of a function describe operation.
Kommentare in der Funktionsdeklaration beschreiben die Verwendung der Funktion, falls nicht banal; Kommentare in der Implementation der Funktion erläutert deren Operationen.
Funktionsdeklarationen
Almost every function declaration should have comments immediately preceding it that describe what the function does and how to use it. These comments may be omitted only if the function is simple and obvious (e.g. simple accessors for obvious properties of the class). These comments should be descriptive ("Opens the file") rather than imperative ("Open the file"); the comment describes the function, it does not tell the function what to do. In general, these comments do not describe how the function performs its task. Instead, that should be left to comments in the function definition.
Types of things to mention in comments at the function declaration:
- What the inputs and outputs are.
- For class member functions: whether the object remembers reference arguments beyond the duration of the method call, and whether it will free them or not.
- If the function allocates memory that the caller must free.
- Whether any of the arguments can be a null pointer.
- If there are any performance implications of how a function is used.
- If the function is re-entrant. What are its synchronization assumptions?
Here is an example:
// Returns an iterator for this table. It is the client's // responsibility to delete the iterator when it is done with it, // and it must not use the iterator once the GargantuanTable object // on which the iterator was created has been deleted. // // The iterator is initially positioned at the beginning of the table. // // This method is equivalent to: // Iterator* iter = table->NewIterator(); // iter->Seek(""); // return iter; // If you are going to immediately seek to another place in the // returned iterator, it will be faster to use NewIterator() // and avoid the extra seek. Iterator* GetIterator() const;
However, do not be unnecessarily verbose or state the completely obvious. Notice below that it is not necessary to say "returns false otherwise" because this is implied.
// Returns true if the table cannot hold any more entries. bool IsTableFull();
When documenting function overrides, focus on the specifics of the override itself, rather than repeating the comment from the overridden function. In many of these cases, the override needs no additional documentation and thus no comment is required.
When commenting constructors and destructors, remember that the person reading your code knows what constructors and destructors are for, so comments that just say something like "destroys this object" are not useful. Document what constructors do with their arguments (for example, if they take ownership of pointers), and what cleanup the destructor does. If this is trivial, just skip the comment. It is quite common for destructors not to have a header comment.
Funktionsdefinitionen
If there is anything tricky about how a function does its job, the function definition should have an explanatory comment. For example, in the definition comment you might describe any coding tricks you use, give an overview of the steps you go through, or explain why you chose to implement the function in the way you did rather than using a viable alternative. For instance, you might mention why it must acquire a lock for the first half of the function but why it is not needed for the second half.
Note you should not just repeat the comments
given with the function declaration, in the
.h
file or wherever. It's okay to
recapitulate briefly what the function does, but the
focus of the comments should be on how it does it.
Variablenkommentare
In general the actual name of the variable should be descriptive enough to give a good idea of what the variable is used for. In certain cases, more comments are required.
Generell sollte der Name einer Variable deren Verwendungszweck genügend gut beschreiben. In einzelnen Fällen sind Kommentare nötig.
Klassen-Daten-Member
The purpose of each class data member (also called an instance
variable or member variable) must be clear. If there are any
invariants (special values, relationships between members, lifetime
requirements) not clearly expressed by the type and name, they must be
commented. However, if the type and name suffice (int
num_events_;
), no comment is needed.
In particular, add comments to describe the existence and meaning of sentinel values, such as nullptr or -1, when they are not obvious. For example:
private: // Used to bounds-check table accesses. -1 means // that we don't yet know how many entries the table has. int num_total_entries_;
Globale Variablen
All global variables should have a comment describing what they are, what they are used for, and (if unclear) why it needs to be global. For example:
// The total number of tests cases that we run through in this regression test. const int kNumTestCases = 6;
Kommentare in der Implementation
In your implementation you should have comments in tricky, non-obvious, interesting, or important parts of your code.
In schwierigen Passagen der Implementation sind Kommentare ein wichtiger Bestandteil des Codes.
Erklärende Kommentare
Tricky or complicated code blocks should have comments before them. Example:
// Divide result by two, taking into account that x // contains the carry from the add. for (int i = 0; i < result->size(); i++) { x = (x << 8) + (*result)[i]; (*result)[i] = x >> 1; x &= 1; }
Zeilenkommentare
Also, lines that are non-obvious should get a comment at the end of the line. These end-of-line comments should be separated from the code by 2 spaces. Example:
// If we have enough memory, mmap the data portion too. mmap_budget = max<int64>(0, mmap_budget - index_->length()); if (mmap_budget >= data_size_ && !MmapData(mmap_chunk_bytes, mlock)) return; // Error already logged.
Note that there are both comments that describe what the code is doing, and comments that mention that an error has already been logged when the function returns.
If you have several comments on subsequent lines, it can often be more readable to line them up:
DoSomething(); // Comment here so the comments line up. DoSomethingElseThatIsLonger(); // Two spaces between the code and the comment. { // One space before comment when opening a new scope is allowed, // thus the comment lines up with the following comments and code. DoSomethingElse(); // Two spaces before line comments normally. } std::vector<string> list{ // Comments in braced lists describe the next element... "First item", // .. and should be aligned appropriately. "Second item"}; DoSomething(); /* For trailing block comments, one space is fine. */
Kommentare zu Funktionsargumenten
When the meaning of a function argument is nonobvious, consider one of the following remedies:
- If the argument is a literal constant, and the same constant is used in multiple function calls in a way that tacitly assumes they're the same, you should use a named constant to make that constraint explicit, and to guarantee that it holds.
- Consider changing the function signature to replace a
bool
argument with anenum
argument. This will make the argument values self-describing. - For functions that have several configuration options, consider defining a single class or struct to hold all the options , and pass an instance of that. This approach has several advantages. Options are referenced by name at the call site, which clarifies their meaning. It also reduces function argument count, which makes function calls easier to read and write. As an added benefit, you don't have to change call sites when you add another option.
- Replace large or complex nested expressions with named variables.
- As a last resort, use comments to clarify argument meanings at the call site.
// What are these arguments? const DecimalNumber product = CalculateProduct(values, 7, false, nullptr);
versus:
ProductOptions options; options.set_precision_decimals(7); options.set_use_cache(ProductOptions::kDontUseCache); const DecimalNumber product = CalculateProduct(values, options, /*completion_callback=*/nullptr);
Was du besser lässt
Do not state the obvious. In particular, don't literally describe what code does, unless the behavior is nonobvious to a reader who understands C++ well. Instead, provide higher level comments that describe why the code does what it does, or make the code self describing.
Compare this:// Find the element in the vector. <-- Bad: obvious! auto iter = std::find(v.begin(), v.end(), element); if (iter != v.end()) { Process(element); }To this:
// Process "element" unless it was already processed. auto iter = std::find(v.begin(), v.end(), element); if (iter != v.end()) { Process(element); }Self-describing code doesn't need a comment. The comment from the example above would be obvious:
if (!IsAlreadyProcessed(element)) { Process(element); }
Satzzeichen, Schreibweise und Grammatik
Pay attention to punctuation, spelling, and grammar; it is easier to read well-written comments than badly written ones.
Achte auf korrekte Schreibweise, Grammatik und richtig gesetzte Satzzeichen. Es ist einfacher und angenehmer gut geschriebene Kommentare zu lesen.
Comments should be as readable as narrative text, with proper capitalization and punctuation. In many cases, complete sentences are more readable than sentence fragments. Shorter comments, such as comments at the end of a line of code, can sometimes be less formal, but you should be consistent with your style.
Although it can be frustrating to have a code reviewer point out that you are using a comma when you should be using a semicolon, it is very important that source code maintain a high level of clarity and readability. Proper punctuation, spelling, and grammar help with that goal.
TODO-Kommentare
Use TODO
comments for code that is temporary,
a short-term solution, or good-enough but not perfect.
Setze einen TODO
-Kommentar für Code, der
temporär oder nicht fertiggestellt ist, ein Quickhack oder überarbeitet
werden sollte.
TODO
s should include the string
TODO
in all caps, followed by the
name, e-mail address, bug ID, or other
identifier
of the person or issue with the best context
about the problem referenced by the TODO
. The
main purpose is to have a consistent TODO
that
can be searched to find out how to get more details upon
request. A TODO
is not a commitment that the
person referenced will fix the problem. Thus when you create
a TODO
with a name, it is almost always your
name that is given.
// TODO(kl@gmail.com): Use a "*" here for concatenation operator. // TODO(Zeke) change this to use relations. // TODO(bug 12345): remove the "Last visitors" feature
If your TODO
is of the form "At a future
date do something" make sure that you either include a
very specific date ("Fix by November 2005") or a very
specific event ("Remove this code when all clients can
handle XML responses.").
Kommentare um Überholtes zu markieren
Mark deprecated interface points with DEPRECATED
comments.
Markiere zurückgezogene Schnittstellen mit einem
DEPRECATED
-Kommentar.
You can mark an interface as deprecated by writing a
comment containing the word DEPRECATED
in
all caps. The comment goes either before the declaration
of the interface or on the same line as the
declaration.
After the word
DEPRECATED
, write your name, e-mail address,
or other identifier in parentheses.
A deprecation comment must include simple, clear directions for people to fix their callsites. In C++, you can implement a deprecated function as an inline function that calls the new interface point.
Marking an interface point DEPRECATED
will not magically cause any callsites to change. If you
want people to actually stop using the deprecated
facility, you will have to fix the callsites yourself or
recruit a crew to help you.
New code should not contain calls to deprecated interface points. Use the new interface point instead. If you cannot understand the directions, find the person who created the deprecation and ask them for help using the new interface point.
Formatierung
Coding style and formatting are pretty arbitrary, but a project is much easier to follow if everyone uses the same style. Individuals may not agree with every aspect of the formatting rules, and some of the rules may take some getting used to, but it is important that all project contributors follow the style rules so that they can all read and understand everyone's code easily.
To help you format code correctly, we've created a settings file for emacs.
Zeilenlänge
Each line of text in your code should be at most 80 characters long.
Keine Zeile des Programmcodes sollte die Länge von 80 Zeichen überschreiten.
We recognize that this rule is controversial, but so much existing code already adheres to it, and we feel that consistency is important.
Those who favor this rule argue that it is rude to force them to resize their windows and there is no need for anything longer. Some folks are used to having several code windows side-by-side, and thus don't have room to widen their windows in any case. People set up their work environment assuming a particular maximum window width, and 80 columns has been the traditional standard. Why change it?
Proponents of change argue that a wider line can make code more readable. The 80-column limit is an hidebound throwback to 1960s mainframes; modern equipment has wide screens that can easily show longer lines.
80 characters is the maximum.
Comment lines can be longer than 80 characters if it is not feasible to split them without harming readability, ease of cut and paste or auto-linking -- e.g. if a line contains an example command or a literal URL longer than 80 characters.
A raw-string literal may have content that exceeds 80 characters. Except for test code, such literals should appear near the top of a file.
An #include
statement with a
long path may exceed 80 columns.
You needn't be concerned about header guards that exceed the maximum length.
Nicht-ASCII Zeichen
Non-ASCII characters should be rare, and must use UTF-8 formatting.
Nicht-ASCII-Zeichen sollten spärlich eingesetzt werden und müssen als UTF-8 formatiert sein.
You shouldn't hard-code user-facing text in source, even English, so use of non-ASCII characters should be rare. However, in certain cases it is appropriate to include such words in your code. For example, if your code parses data files from foreign sources, it may be appropriate to hard-code the non-ASCII string(s) used in those data files as delimiters. More commonly, unittest code (which does not need to be localized) might contain non-ASCII strings. In such cases, you should use UTF-8, since that is an encoding understood by most tools able to handle more than just ASCII.
Hex encoding is also OK, and encouraged where it
enhances readability — for example,
"\xEF\xBB\xBF"
, or, even more simply,
u8"\uFEFF"
, is the Unicode zero-width
no-break space character, which would be invisible if
included in the source as straight UTF-8.
Use the u8
prefix
to guarantee that a string literal containing
\uXXXX
escape sequences is encoded as UTF-8.
Do not use it for strings containing non-ASCII characters
encoded as UTF-8, because that will produce incorrect
output if the compiler does not interpret the source file
as UTF-8.
You shouldn't use the C++11 char16_t
and
char32_t
character types, since they're for
non-UTF-8 text. For similar reasons you also shouldn't
use wchar_t
(unless you're writing code that
interacts with the Windows API, which uses
wchar_t
extensively).
Leerzeichen gegenüber Tabulator
Use only spaces, and indent 2 spaces at a time.
Benutze nur Leerzeichen und rücke Zeilen mit zweien ein.
We use spaces for indentation. Do not use tabs in your code. You should set your editor to emit spaces when you hit the tab key.
Funktionsdeklarationen und -definitionen
Return type on the same line as function name, parameters on the same line if they fit. Wrap parameter lists which do not fit on a single line as you would wrap arguments in a function call.
Der Rückgabetyp steht auf der gleichen Zeile wie der Funktionsname. Parameter desgleichen, wenn sie auf eine Zeile passen. Ansonsten werden sie wie Funktionsargumente umgebrochen.
Functions look like this:
ReturnType ClassName::FunctionName(Type par_name1, Type par_name2) { DoSomething(); ... }
If you have too much text to fit on one line:
ReturnType ClassName::ReallyLongFunctionName(Type par_name1, Type par_name2, Type par_name3) { DoSomething(); ... }
or if you cannot fit even the first parameter:
ReturnType LongClassName::ReallyReallyReallyLongFunctionName( Type par_name1, // 4 space indent Type par_name2, Type par_name3) { DoSomething(); // 2 space indent ... }
Some points to note:
- Choose good parameter names.
- Parameter names may be omitted only if the parameter is unused and its purpose is obvious.
- If you cannot fit the return type and the function name on a single line, break between them.
- If you break after the return type of a function declaration or definition, do not indent.
- The open parenthesis is always on the same line as the function name.
- There is never a space between the function name and the open parenthesis.
- There is never a space between the parentheses and the parameters.
- The open curly brace is always on the end of the last line of the function declaration, not the start of the next line.
- The close curly brace is either on the last line by itself or on the same line as the open curly brace.
- There should be a space between the close parenthesis and the open curly brace.
- All parameters should be aligned if possible.
- Default indentation is 2 spaces.
- Wrapped parameters have a 4 space indent.
Unused parameters that are obvious from context may be omitted:
class Foo { public: Foo(Foo&&); Foo(const Foo&); Foo& operator=(Foo&&); Foo& operator=(const Foo&); };
Unused parameters that might not be obvious should comment out the variable name in the function definition:
class Shape { public: virtual void Rotate(double radians) = 0; }; class Circle : public Shape { public: void Rotate(double radians) override; }; void Circle::Rotate(double /*radians*/) {}
// Bad - if someone wants to implement later, it's not clear what the // variable means. void Circle::Rotate(double) {}
Attributes, and macros that expand to attributes, appear at the very beginning of the function declaration or definition, before the return type:
MUST_USE_RESULT bool IsOK();
Lambda-Ausdrücke
Format parameters and bodies as for any other function, and capture lists like other comma-separated lists.
Formatiere deren Argumente und Funktionskörper wie andere Funktionen, die capture-List wie andere kommagetrennte Listen.
For by-reference captures, do not leave a space between the ampersand (&) and the variable name.
int x = 0; auto x_plus_n = [&x](int n) -> int { return x + n; }
Short lambdas may be written inline as function arguments.
std::set<int> blacklist = {7, 8, 9}; std::vector<int> digits = {3, 9, 1, 8, 4, 7, 1}; digits.erase(std::remove_if(digits.begin(), digits.end(), [&blacklist](int i) { return blacklist.find(i) != blacklist.end(); }), digits.end());
Funktionsaufrufe
Either write the call all on a single line, wrap the arguments at the parenthesis, or start the arguments on a new line indented by four spaces and continue at that 4 space indent. In the absence of other considerations, use the minimum number of lines, including placing multiple arguments on each line where appropriate.
Schreibe entweder den Aufruf auf einer Zeile oder setze nach der öffnenden Klammer auf einer neuen Zeile fort, eingerückt um jeweils vier Leerzeichen. Verwende nur soviele Zeilen, wie nötig.
Function calls have the following format:
bool result = DoSomething(argument1, argument2, argument3);
If the arguments do not all fit on one line, they should be broken up onto multiple lines, with each subsequent line aligned with the first argument. Do not add spaces after the open paren or before the close paren:
bool result = DoSomething(averyveryveryverylongargument1, argument2, argument3);
Arguments may optionally all be placed on subsequent lines with a four space indent:
if (...) { ... ... if (...) { bool result = DoSomething( argument1, argument2, // 4 space indent argument3, argument4); ... }
Put multiple arguments on a single line to reduce the number of lines necessary for calling a function unless there is a specific readability problem. Some find that formatting with strictly one argument on each line is more readable and simplifies editing of the arguments. However, we prioritize for the reader over the ease of editing arguments, and most readability problems are better addressed with the following techniques.
If having multiple arguments in a single line decreases readability due to the complexity or confusing nature of the expressions that make up some arguments, try creating variables that capture those arguments in a descriptive name:
int my_heuristic = scores[x] * y + bases[x]; bool result = DoSomething(my_heuristic, x, y, z);
Or put the confusing argument on its own line with an explanatory comment:
bool result = DoSomething(scores[x] * y + bases[x], // Score heuristic. x, y, z);
If there is still a case where one argument is significantly more readable on its own line, then put it on its own line. The decision should be specific to the argument which is made more readable rather than a general policy.
Sometimes arguments form a structure that is important for readability. In those cases, feel free to format the arguments according to that structure:
// Transform the widget by a 3x3 matrix. my_widget.Transform(x1, x2, x3, y1, y2, y3, z1, z2, z3);
Format der geschwungenen Initialisierungsliste
Format a braced initializer list exactly like you would format a function call in its place.
Formatiere eine Initialisierungsliste mit geschwungenen Klammern wie einen Funktionsaufruf.
If the braced list follows a name (e.g. a type or
variable name), format as if the {}
were the
parentheses of a function call with that name. If there
is no name, assume a zero-length name.
// Examples of braced init list on a single line. return {foo, bar}; functioncall({foo, bar}); std::pair<int, int> p{foo, bar}; // When you have to wrap. SomeFunction( {"assume a zero-length name before {"}, some_other_function_parameter); SomeType variable{ some, other, values, {"assume a zero-length name before {"}, SomeOtherType{ "Very long string requiring the surrounding breaks.", some, other values}, SomeOtherType{"Slightly shorter string", some, other, values}}; SomeType variable{ "This is too long to fit all in one line"}; MyType m = { // Here, you could also break before {. superlongvariablename1, superlongvariablename2, {short, interior, list}, {interiorwrappinglist, interiorwrappinglist2}};
Bedingte Verzweigung
Prefer no spaces inside parentheses. The if
and else
keywords belong on separate lines.
Innerhalb geklammerter Ausdrücke sollten keine Leerzeichen
stehen. Die Anweisungen if
und else
müssen in eigenen Zeilen abgesetzt stehen.
There are two acceptable formats for a basic conditional statement. One includes spaces between the parentheses and the condition, and one does not.
The most common form is without spaces. Either is fine, but be consistent. If you are modifying a file, use the format that is already present. If you are writing new code, use the format that the other files in that directory or project use. If in doubt and you have no personal preference, do not add the spaces.
if (condition) { // no spaces inside parentheses ... // 2 space indent. } else if (...) { // The else goes on the same line as the closing brace. ... } else { ... }
If you prefer you may add spaces inside the parentheses:
if ( condition ) { // spaces inside parentheses - rare ... // 2 space indent. } else { // The else goes on the same line as the closing brace. ... }
Note that in all cases you must have a space between
the if
and the open parenthesis. You must
also have a space between the close parenthesis and the
curly brace, if you're using one.
if(condition) { // Bad - space missing after IF. if (condition){ // Bad - space missing before {. if(condition){ // Doubly bad.
if (condition) { // Good - proper space after IF and before {.
Short conditional statements may be written on one
line if this enhances readability. You may use this only
when the line is brief and the statement does not use the
else
clause.
if (x == kFoo) return new Foo(); if (x == kBar) return new Bar();
This is not allowed when the if statement has an
else
:
// Not allowed - IF statement on one line when there is an ELSE clause if (x) DoThis(); else DoThat();
In general, curly braces are not required for
single-line statements, but they are allowed if you like
them; conditional or loop statements with complex
conditions or statements may be more readable with curly
braces. Some
projects require that an
if
must always always have an accompanying
brace.
if (condition) DoSomething(); // 2 space indent. if (condition) { DoSomething(); // 2 space indent. }
However, if one part of an
if
-else
statement uses curly
braces, the other part must too:
// Not allowed - curly on IF but not ELSE if (condition) { foo; } else bar; // Not allowed - curly on ELSE but not IF if (condition) foo; else { bar; }
// Curly braces around both IF and ELSE required because // one of the clauses used braces. if (condition) { foo; } else { bar; }
Schleifen- und Fallunterscheidungsanweisung
Switch statements may use braces for blocks. Annotate
non-trivial fall-through between cases.
Braces are optional for single-statement loops.
Empty loop bodies should use empty braces or continue
.
In Fallunterscheidungsanweisungen können Bereiche in
geschwungenen Klammern stehen. Weise daraufhin, wenn Fälle einen Codebereich
teilen.
In Schleifen sind die geschwungenen Klammern nur nötig, falls sie mehr
als einen einzelnen Befehl einschliessen. Ohne Befehle sollte der Bereich
geklammert sein oder durch das Kennwort continue
ersetzt
werden.
case
blocks in switch
statements can have curly braces or not, depending on
your preference. If you do include curly braces they
should be placed as shown below.
If not conditional on an enumerated value, switch
statements should always have a default
case
(in the case of an enumerated value, the compiler will
warn you if any values are not handled). If the default
case should never execute, simply
assert
:
switch (var) { case 0: { // 2 space indent ... // 4 space indent break; } case 1: { ... break; } default: { assert(false); } }
Braces are optional for single-statement loops.
for (int i = 0; i < kSomeNumber; ++i) printf("I love you\n"); for (int i = 0; i < kSomeNumber; ++i) { printf("I take it back\n"); }
Empty loop bodies should use an empty pair of braces or continue
,
but not a single semicolon.
while (condition) { // Repeat test until it returns false. } for (int i = 0; i < kSomeNumber; ++i) {} // Good - one newline is also OK. while (condition) continue; // Good - continue indicates no logic.
while (condition); // Bad - looks like part of do/while loop.
Zeiger- und Referenzenausdrücke
No spaces around period or arrow. Pointer operators do not have trailing spaces.
Keine Leerzeichen um Punkt oder Pfeil. Zeigeroperatoren haben kein nachgestelltes Leerzeichen.
The following are examples of correctly-formatted pointer and reference expressions:
x = *p; p = &x; x = r.y; x = r->y;
Note that:
- There are no spaces around the period or arrow when accessing a member.
- Pointer operators have no space after the
*
or&
.
When declaring a pointer variable or argument, you may place the asterisk adjacent to either the type or to the variable name:
// These are fine, space preceding. char *c; const string &str; // These are fine, space following. char* c; const string& str;It is allowed (if unusual) to declare multiple variables in the same declaration, but it is disallowed if any of those have pointer or reference decorations. Such declarations are easily misread.
// Fine if helpful for readability. int x, y;
int x, *y; // Disallowed - no & or * in multiple declaration char * c; // Bad - spaces on both sides of * const string & str; // Bad - spaces on both sides of &
You should do this consistently within a single file, so, when modifying an existing file, use the style in that file.
Boolsche Ausdrücke
When you have a boolean expression that is longer than the standard line length, be consistent in how you break up the lines.
Sei konsistent im Umbrechen von langen boolschen Audrücken, wenn sie die Zeilenlänge überschreiten.
In this example, the logical AND operator is always at the end of the lines:
if (this_one_thing > this_other_thing && a_third_thing == a_fourth_thing && yet_another && last_one) { ... }
Note that when the code wraps in this example, both of
the &&
logical AND operators are at
the end of the line. This is more common in Google code,
though wrapping all operators at the beginning of the
line is also allowed. Feel free to insert extra
parentheses judiciously because they can be very helpful
in increasing readability when used
appropriately. Also note that you should always use
the punctuation operators, such as
&&
and ~
, rather than
the word operators, such as and
and
compl
.
Rückgabewerte
Do not needlessly surround the return
expression with parentheses.
Um den return
-Ausdruck sollten
keine überflüssigen Klammern gesetzt werden.
Use parentheses in return expr;
only
where you would use them in x = expr;
.
return result; // No parentheses in the simple case. // Parentheses OK to make a complex expression more readable. return (some_long_condition && another_condition);
return (value); // You wouldn't write var = (value); return(result); // return is not a function!
Variablen- und Arrayinitialisierung
Your choice of =
, ()
, or
{}
.
Zur Auswahl stehen =
, ()
oder
{}
.
You may choose between =
,
()
, and {}
; the following are
all correct:
int x = 3; int x(3); int x{3}; string name = "Some Name"; string name("Some Name"); string name{"Some Name"};
Be careful when using a braced initialization list {...}
on a type with an std::initializer_list
constructor.
A nonempty braced-init-list prefers the
std::initializer_list
constructor whenever
possible. Note that empty braces {}
are special, and
will call a default constructor if available. To force the
non-std::initializer_list
constructor, use parentheses
instead of braces.
std::vector<int> v(100, 1); // A vector of 100 1s. std::vector<int> v{100, 1}; // A vector of 100, 1.
Also, the brace form prevents narrowing of integral types. This can prevent some types of programming errors.
int pi(3.14); // OK -- pi == 3. int pi{3.14}; // Compile error: narrowing conversion.
Präprozessordirektiven
The hash mark that starts a preprocessor directive should always be at the beginning of the line.
Das Doppelkreuz, das eine Präprozessordirektive einleitet, sollte immer am Anfang der Zeile stehen.
Even when preprocessor directives are within the body of indented code, the directives should start at the beginning of the line.
// Good - directives at beginning of line if (lopsided_score) { #if DISASTER_PENDING // Correct -- Starts at beginning of line DropEverything(); # if NOTIFY // OK but not required -- Spaces after # NotifyClient(); # endif #endif BackToNormal(); }
// Bad - indented directives if (lopsided_score) { #if DISASTER_PENDING // Wrong! The "#if" should be at beginning of line DropEverything(); #endif // Wrong! Do not indent "#endif" BackToNormal(); }
Formatierung von Klassen
Sections in public
, protected
and
private
order, each indented one space.
Die Sektionen public
, protected
und
private
stehen in dieser Reihenfolge und werden jeweils
um ein Leerzeichen eingerückt.
The basic format for a class definition (lacking the comments, see Class Comments for a discussion of what comments are needed) is:
class MyClass : public OtherClass { public: // Note the 1 space indent! MyClass(); // Regular 2 space indent. explicit MyClass(int var); ~MyClass() {} void SomeFunction(); void SomeFunctionThatDoesNothing() { } void set_some_var(int var) { some_var_ = var; } int some_var() const { return some_var_; } private: bool SomeInternalFunction(); int some_var_; int some_other_var_; };
Things to note:
- Any base class name should be on the same line as the subclass name, subject to the 80-column limit.
- The
public:
,protected:
, andprivate:
keywords should be indented one space. - Except for the first instance, these keywords should be preceded by a blank line. This rule is optional in small classes.
- Do not leave a blank line after these keywords.
- The
public
section should be first, followed by theprotected
and finally theprivate
section. - See Declaration Order for rules on ordering declarations within each of these sections.
Initialisierungslisten in Erzeugerinnen
Constructor initializer lists can be all on one line or with subsequent lines indented four spaces.
Initialisierungslisten in Erzeugerinnen können auf einer Zeile stehen oder jede in einer Zeile für sich eingerückt um vier Leerzeichen.
The acceptable formats for initializer lists are:
// When everything fits on one line: MyClass::MyClass(int var) : some_var_(var) { DoSomething(); } // If the signature and initializer list are not all on one line, // you must wrap before the colon and indent 4 spaces: MyClass::MyClass(int var) : some_var_(var), some_other_var_(var + 1) { DoSomething(); } // When the list spans multiple lines, put each member on its own line // and align them: MyClass::MyClass(int var) : some_var_(var), // 4 space indent some_other_var_(var + 1) { // lined up DoSomething(); } // As with any other code block, the close curly can be on the same // line as the open curly, if it fits. MyClass::MyClass(int var) : some_var_(var) {}
Formatierung von Namensräumen
The contents of namespaces are not indented.
Der Inhalt von Namensräumen wird nie eingerückt.
Namespaces do not add an extra level of indentation. For example, use:
namespace { void foo() { // Correct. No extra indentation within namespace. ... } } // namespace
Do not indent within a namespace:
namespace { // Wrong. Indented when it should not be. void foo() { ... } } // namespace
When declaring nested namespaces, put each namespace on its own line.
namespace foo { namespace bar {
Horizontale Leerzeichen
Use of horizontal whitespace depends on location. Never put trailing whitespace at the end of a line.
Der Gebrauch von horizontalem Leerraum hängt vom Ort ab. Lasse nie Leerzeichen am Ende einer Zeile stehen.
Generell
void f(bool b) { // Open braces should always have a space before them. ... int i = 0; // Semicolons usually have no space before them. // Spaces inside braces for braced-init-list are optional. If you use them, // put them on both sides! int x[] = { 0 }; int x[] = {0}; // Spaces around the colon in inheritance and initializer lists. class Foo : public Bar { public: // For inline function implementations, put spaces between the braces // and the implementation itself. Foo(int b) : Bar(), baz_(b) {} // No spaces inside empty braces. void Reset() { baz_ = 0; } // Spaces separating braces from implementation. ...
Adding trailing whitespace can cause extra work for others editing the same file, when they merge, as can removing existing trailing whitespace. So: Don't introduce trailing whitespace. Remove it if you're already changing that line, or do it in a separate clean-up operation (preferably when no-one else is working on the file).
Schleifen und bedingte Verzweigungen
if (b) { // Space after the keyword in conditions and loops. } else { // Spaces around else. } while (test) {} // There is usually no space inside parentheses. switch (i) { for (int i = 0; i < 5; ++i) { // Loops and conditions may have spaces inside parentheses, but this // is rare. Be consistent. switch ( i ) { if ( test ) { for ( int i = 0; i < 5; ++i ) { // For loops always have a space after the semicolon. They may have a space // before the semicolon, but this is rare. for ( ; i < 5 ; ++i) { ... // Range-based for loops always have a space before and after the colon. for (auto x : counts) { ... } switch (i) { case 1: // No space before colon in a switch case. ... case 2: break; // Use a space after a colon if there's code after it.
Operatoren
// Assignment operators always have spaces around them. x = 0; // Other binary operators usually have spaces around them, but it's // OK to remove spaces around factors. Parentheses should have no // internal padding. v = w * x + y / z; v = w*x + y/z; v = w * (x + z); // No spaces separating unary operators and their arguments. x = -5; ++x; if (x && !y) ...
Vorlagen und Typumwandlungen
// No spaces inside the angle brackets (< and >), before // <, or between >( in a cast std::vector<string> x; y = static_cast<char*>(x); // Spaces between type and pointer are OK, but be consistent. std::vector<char *> x;
Vertikaler Leerraum
Minimize use of vertical whitespace.
Schränke den Einsatz von vertikalem Leerraum ein.
This is more a principle than a rule: don't use blank lines when you don't have to. In particular, don't put more than one or two blank lines between functions, resist starting functions with a blank line, don't end functions with a blank line, and be discriminating with your use of blank lines inside functions.
The basic principle is: The more code that fits on one screen, the easier it is to follow and understand the control flow of the program. Of course, readability can suffer from code being too dense as well as too spread out, so use your judgement. But in general, minimize use of vertical whitespace.
Some rules of thumb to help when blank lines may be useful:
- Blank lines at the beginning or end of a function very rarely help readability.
- Blank lines inside a chain of if-else blocks may well help readability.
Ausnahmen zu den Regeln
The coding conventions described above are mandatory. However, like all good rules, these sometimes have exceptions, which we discuss here.
Die oben beschriebenen Programmierkonventionen sind verbindlich. Andererseits, wie alle guten Regeln, haben auch diese Ausnahmen, die wir im Folgenden besprechen.
Existierender, nicht konformer Code
You may diverge from the rules when dealing with code that does not conform to this style guide.
Von den Regeln darf abgewichen werden, wenn mit Code gearbeitet wird, der nicht mit dieser Stilvorgabe vereinbar ist.
If you find yourself modifying code that was written to specifications other than those presented by this guide, you may have to diverge from these rules in order to stay consistent with the local conventions in that code. If you are in doubt about how to do this, ask the original author or the person currently responsible for the code. Remember that consistency includes local consistency, too.
Code für Windows
Windows programmers have developed their own set of coding conventions, mainly derived from the conventions in Windows headers and other Microsoft code. We want to make it easy for anyone to understand your code, so we have a single set of guidelines for everyone writing C++ on any platform.
Windowsprogrammierer haben ihre eigenen Konventionen erarbeitet, hauptsächlich aus den Windows-Header und anderem Code von Microsoft. Wir wollen es für jeden einfach machen, deinen Code zu verstehen. Deshalb haben wir einen einzigen Satz an Vorgaben für alle, die C++ Code schreiben, auf jeder Plattform.
It is worth reiterating a few of the guidelines that you might forget if you are used to the prevalent Windows style:
- Do not use Hungarian notation (for example, naming
an integer
iNum
). Use the Google naming conventions, including the.cc
extension for source files. - Windows defines many of its own synonyms for
primitive types, such as
DWORD
,HANDLE
, etc. It is perfectly acceptable, and encouraged, that you use these types when calling Windows API functions. Even so, keep as close as you can to the underlying C++ types. For example, useconst TCHAR *
instead ofLPCTSTR
. - When compiling with Microsoft Visual C++, set the compiler to warning level 3 or higher, and treat all warnings as errors.
- Do not use
#pragma once
; instead use the standard Google include guards. The path in the include guards should be relative to the top of your project tree. - In fact, do not use any nonstandard extensions,
like
#pragma
and__declspec
, unless you absolutely must. Using__declspec(dllimport)
and__declspec(dllexport)
is allowed; however, you must use them through macros such asDLLIMPORT
andDLLEXPORT
, so that someone can easily disable the extensions if they share the code.
However, there are just a few rules that we occasionally need to break on Windows:
- Normally we forbid the use of multiple implementation inheritance; however, it is required when using COM and some ATL/WTL classes. You may use multiple implementation inheritance to implement COM or ATL/WTL classes and interfaces.
- Although you should not use exceptions in your own
code, they are used extensively in the ATL and some
STLs, including the one that comes with Visual C++.
When using the ATL, you should define
_ATL_NO_EXCEPTIONS
to disable exceptions. You should investigate whether you can also disable exceptions in your STL, but if not, it is OK to turn on exceptions in the compiler. (Note that this is only to get the STL to compile. You should still not write exception handling code yourself.) - The usual way of working with precompiled headers
is to include a header file at the top of each source
file, typically with a name like
StdAfx.h
orprecompile.h
. To make your code easier to share with other projects, avoid including this file explicitly (except inprecompile.cc
), and use the/FI
compiler option to include the file automatically. - Resource headers, which are usually named
resource.h
and contain only macros, do not need to conform to these style guidelines.
Verabschiedende Worte
Use common sense and BE CONSISTENT.
If you are editing code, take a few minutes to look at the
code around you and determine its style. If they use spaces
around their if
clauses, you should, too. If their
comments have little boxes of stars around them, make your
comments have little boxes of stars around them too.
The point of having style guidelines is to have a common vocabulary of coding so people can concentrate on what you are saying, rather than on how you are saying it. We present global style rules here so people know the vocabulary. But local style is also important. If code you add to a file looks drastically different from the existing code around it, the discontinuity throws readers out of their rhythm when they go to read it. Try to avoid this.
OK, enough writing about writing code; the code itself is much more interesting. Have fun!